Alternatives and similar repositories for ccs32clara-chademo

Users that are interested in ccs32clara-chademo are comparing it to the libraries listed below

• dalathegreat / Nissan-Leaf-Battery-to-OBD2
  An opensource solution for connecting OBD2 straight to the Nissan Leaf battery
  ☆66Updated last year
• botaneta / JKbms_Emu_Pylon
  Emulación del protocolo CANBUS de Pylontech, para comunicación con inversores fotovoltaicos, usando un ESP32
  ☆13Updated last week
• juamiso / PYLON_EMU
  Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)
  ☆45Updated 4 years ago
• NEEY-electronic / JK
  ☆66Updated 3 years ago
• nickn17 / evDash
  EV dashboard - software for small dev boards connected to the car via obd2 BLE4 or CAN bus.
  ☆160Updated this week
• irekzielinski / Pylontech-Battery-Monitoring
  Adding WiFi monitoring to US2000B and US2000C batteries.
  ☆152Updated last month
• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆83Updated 2 years ago
• Tom-evnut / VEcan
  Communicating with Victron energy products, also compatible with other inverters and solar equipement
  ☆21Updated 8 years ago
• Lyve1981 / GrowattUsbModbus
  Growatt ModBus => MQTT translation service
  ☆25Updated 2 years ago
• aaronsb / victronvenussupport
  Support files for managing and deploying my Victron Venus OS stuff
  ☆20Updated 5 years ago
• syssi / esphome-jbd-bms
  ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
  ☆205Updated this week
• patience4711 / RPI-APS-inverters
  a software for a raspberry pi zero to read the production of aps inverters yc600 and qs1
  ☆52Updated 5 months ago
• CurtRod / SimpleEVSE-WiFi
  Brings EVSE WB/DIN into your WiFi
  ☆83Updated 3 years ago
• jpraus / arduino-opentherm
  Arduino library and hardware shield to send and receive data from Opentherm devices
  ☆181Updated 2 years ago
• Uksa007 / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆198Updated last year
• kolins-cz / Smart-BMS-Bluetooth-ESP32
  Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy
  ☆117Updated last year
• loopyengineeringco / Daly2Sofar
  ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).
  ☆33Updated 2 years ago
• OpenEVSE / open_evse
  Firmware for Open EVSE
  ☆142Updated last year
• ArminJo / JK-BMSToPylontechCAN
  Converts the JK-BMS RS485 data to Pylontech CAN data
  ☆98Updated 9 months ago
• gonium / EVSE-Car-Simulator
  A simple car simulator PCB for testing EVSE.
  ☆52Updated 2 years ago
• cribskip / esp8266_lgawhp
  Bridge for 2018+ R32 LG Air/Water-Heat pumps
  ☆24Updated 3 years ago
• mrconstantin / JkBms_LV_Can_Protocol_Emulator
  DIY CAN BMS emulator project to integrate DIY battery with different brands of invertors with CAN or RS485 communication.
  ☆12Updated 2 years ago
• sshoecraft / jbdtool
  JBD BMS Linux utility
  ☆71Updated 7 months ago
• Nekraus / PARKSIDE_PMRA
  Reverse engineering PARKSIDE 20V PMRA 20-Li
  ☆22Updated last year
• kwindrem / RpiDisplaySetup
  Raspberry Pi 7" touchscreen for Venus OS (also HDMI)
  ☆52Updated 9 months ago
• openenergymonitor / open_evse
  Firmware for OpenEnergyMonitor OpenEVSE
  ☆18Updated 3 years ago
• jblance / jkbms
  repo with attempts to test connectivity to JK-BMS via BLE
  ☆30Updated 3 years ago
• dalathegreat / leaf_can_bus_messages
  LEAF CAN bus message decoding with proper database files
  ☆209Updated 8 months ago
• fotherja / EV_Charger
  Arduino Uno Code for EV Charger
  ☆160Updated 2 years ago
• jblance / mpp-solar
  Python package to communicate to MPP Solar PIP-4048MS inverters (and similar)
  ☆416Updated last month