Alternatives and similar repositories for Nissan-LEAF-Battery-Upgrade

Users that are interested in Nissan-LEAF-Battery-Upgrade are comparing it to the libraries listed below

• dalathegreat / Nissan-LEAF-CCS
  Information for how to add CCS to your LEAF, keeping it relevant for many years to come!
  ☆79Updated 2 years ago
• dalathegreat / Nissan-Leaf-Battery-to-OBD2
  An opensource solution for connecting OBD2 straight to the Nissan Leaf battery
  ☆63Updated last year
• dalathegreat / Nissan-LEAF-Inverter-Upgrade
  Software for extracting more power from LEAF inverter upgrades. Enables 110kW and 160kW inverters to function with the older LEAF
  ☆75Updated 7 months ago
• dalathegreat / LeafEnhancer-UserManual
  User manual for the LeafEnhancer software developed by Dala's EV Repair
  ☆31Updated 4 years ago
• Tom-evnut / SimpBMS
  SimpBMS Documentation
  ☆89Updated 3 years ago
• openhp / HeatPumpController
  The Valden Heat Pump controller is a platform to precisely control heat pumps
  ☆142Updated 4 years ago
• dalathegreat / leaf_can_bus_messages
  LEAF CAN bus message decoding with proper database files
  ☆205Updated 4 months ago
• dalathegreat / Nissan-Leaf-ChargeCurrent
  Software for adjusting AC charge speed on the Nissan Leaf
  ☆33Updated 5 years ago
• stuartpittaway / diyBMSv4Leaf
  diy BMS version 4 for Nissan Leaf cells
  ☆20Updated 4 years ago
• dalathegreat / Nissan-Leaf-BatteryPairing
  Commands for pairing batteries
  ☆29Updated 3 years ago
• EQMOD / EQM_OBDWEB
  A WEB Based OBDII Dongle Platform using the ESP32 WROVER Module
  ☆348Updated last year
• SimonRafferty / Webasto-Heater---Replacement-Controller
  An Arduino M0 based controller for Webasto C/E Diesel Water Heaters
  ☆56Updated 8 months ago
• flodorn / TeslaBMSV2
  ☆17Updated 2 years ago
• Tom-evnut / BMWI3BMS
  SIMPBMS code for I3 Modules
  ☆46Updated 2 years ago
• fotherja / EV_Charger
  Arduino Uno Code for EV Charger
  ☆155Updated last year
• MyLab-odyssey / ED_BMSdiag
  Retrieve battery diagnostic data from your smart electric drive EV.
  ☆56Updated 3 years ago
• nickn17 / evDash
  EV dashboard - software for small dev boards connected to the car via obd2 BLE4 or CAN bus.
  ☆152Updated last month
• dexterbg / Twizy-Virtual-BMS
  This is an Arduino library providing an emulation of the CAN communication protocol of the BMS (battery management system) on a Renault T…
  ☆88Updated 2 years ago
• craigpeacock / Huawei_R4850G2_CAN
  Example code to communicate with Huawei R4850G2 Power Supply via CAN
  ☆75Updated last year
• uhi22 / foccci
  Fully Open CCS Charge Controller Interface with QCA7005 PLC modem
  ☆83Updated 3 months ago
• dalathegreat / Nissan-LEAF-PTC-heater-reverse-engineering
  Tips and tricks on repairing the fragile ZE0 LEAF PTC heater
  ☆11Updated 3 years ago
• damienmaguire / BMW-i3-CCS
  Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging
  ☆47Updated last year
• NismoBoy34 / Esp32LeafInverterBridge
  esp32 Based can-bridge with webserver
  ☆18Updated last year
• Tom-evnut / AmperaBattery
  Information on using the Chevy Volt / Opel Ampera Battery BMS
  ☆19Updated last year
• OpenEVSE / open_evse
  Firmware for Open EVSE
  ☆136Updated 8 months ago
• DanyEarth / TC-Charger-CAN-controller
  The source code for the CAN controller for TC chargers can be found here, as well as the correct library for the MCP chip which works str…
  ☆12Updated 6 years ago
• JejuSoul / OBD-PIDs-for-HKMC-EVs
  Setting up Torque Pro to show OBD data on Hyundai / Kia Electric Vehicles
  ☆253Updated 4 years ago
• meatpiHQ / wican-fw
  ☆484Updated this week
• dalathegreat / Nissan-Leaf-Bruteforce-Upgrade
  Software for correcting instrumentation on a battery "bruteforce" upgraded LEAF
  ☆22Updated 5 years ago
• stuartpittaway / WebastoHeaterWBusArduinoInterface
  Arduino software for controlling Webasto ThermoTop heaters over its custom WBUS protocol
  ☆27Updated 8 years ago