Alternatives and similar repositories for ubxtranslator

Users that are interested in ubxtranslator are comparing it to the libraries listed below

• Korving-F / ublox
  Python library for the UBX protocol
  ☆37Updated 5 years ago
• mayeranalytics / pyUBX
  Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.
  ☆90Updated 4 years ago
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆101Updated last month
• septentrio-gnss / uBloxCorrectionsWithSeptentrio
  ☆13Updated last year
• tridge / pyUblox
  python Ublox module
  ☆105Updated 2 years ago
• commschamp / cc.ublox.commsdsl
  CommsDSL schema-based definition of UBLOX protocol
  ☆43Updated last week
• semuconsulting / pynmeagps
  Python library for parsing and generating NMEA 0183 GNSS/GPS protocol messages.
  ☆100Updated 3 weeks ago
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆61Updated last year
• sparkfun / SparkFun_u-blox_GNSS_v3
  An Arduino library which allows you to communicate seamlessly with u-blox GNSS modules using the Configuration Interface
  ☆91Updated 2 months ago
• u-blox / ublox-C099_F9P-uCS
  ☆63Updated 5 years ago
• sparkfun / SparkFun_Ublox_Arduino_Library
  Library to control UBX binary protocol and NMEA over I2C on Ublox GPS modules
  ☆147Updated 4 years ago
• HongshiTan / RTIMULib2
  9-dof, 10-dof and 11-dof IMU fusion library for Linux systems (development version)
  ☆91Updated 3 years ago
• rascol / PPS-Client
  ☆41Updated 3 years ago
• sparkfun / Qwiic_GPS-RTK2
  A breakout board for the ZED-F9P GNSS RTK capable module from u-blox.
  ☆57Updated 2 years ago
• jacobjhansen / RTCM-Pi
  GNSS Base Station based on Raspberry Pi 4B
  ☆50Updated 2 years ago
• sparkfun / Qwiic_Ublox_Gps_Py
  ☆80Updated 10 months ago
• sparkfun / SparkFun_RTK_Facet
  The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.
  ☆21Updated last year
• mazgch / hpg
  This project demonstrates a full RTK solution with built in correction services.
  ☆105Updated 3 weeks ago
• sparkfun / SparkFun_RTK_Everywhere_Firmware
  Centimeter precision GPS/GNSS using L1/L2/L5 signals broadcast over Bluetooth, WiFi, and Ethernet.
  ☆44Updated this week
• septentrio-gnss / septentrio_gnss_driver
  ROS 1 & 2 driver for Septentrio GNSS & INS receivers
  ☆111Updated 3 months ago
• FlyTheThings / uNavINS
  ☆49Updated 7 years ago
• OpenCyphal / pycyphal
  Python implementation of the Cyphal protocol stack.
  ☆134Updated 3 months ago
• CentipedeRTK / pi-gen_RTKbase
  fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images
  ☆23Updated last year
• introlab / OpenIMU-MiniLogger
  OpenIMU - Open Hardware Mini Logger based on ESP32
  ☆42Updated 3 years ago
• slgrobotics / Esp32_RTK_BaseStation
  Esp32 RTK BaseStation - sends u-Blox ZED-F9P RTCM correction data to rtk2go.com NTRIP caster
  ☆32Updated 3 years ago
• emlid / ntripbrowser
  CLI tool to easily get NTRIP caster information
  ☆33Updated 4 months ago
• sparkfun / OpenLog_Artemis
  The OpenLog Artemis is an open source datalogger the comes preprogrammed to automatically log IMU, GPS, serial data, and various pressure…
  ☆99Updated last month
• bolderflight / vector-nav
  Arduino and CMake driver for VectorNav INS sensors.
  ☆17Updated 2 years ago
• ldab / u-blox_GNSS
  u-blox GNSS receiver library light weight for low power tracking application
  ☆26Updated 5 years ago