Alternatives and similar repositories for docker-rtklib-onocoy-rtkdirect

Users that are interested in docker-rtklib-onocoy-rtkdirect are comparing it to the libraries listed below

• GNSSOEM / ELT_RTKBase
  Raspbian compatible RtkBase software for Unicore UM98x, Bynav M2x and Septentrio Mosaic X5
  ☆49Updated this week
• pbeyssac / millipede-caster
  The Millipede NTRIP/RTK caster
  ☆29Updated 2 months ago
• Erensu / cors
  Continuously Operating Reference Stations (CORS), provide network RTK differential service.
  ☆27Updated 2 months ago
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆60Updated last year
• rokubun / gnss_tools
  Docker that encapsulates various GNSS processing tools
  ☆20Updated 3 years ago
• goblimey / ntripcaster
  Docker file and instructions to build and run the BKG NTRIP caster
  ☆114Updated 10 months ago
• rinex20 / ntripcaster_docker
  ☆12Updated 2 years ago
• fguiet / gnss-rtk
  My own RTK network
  ☆24Updated last year
• taroz / mosaicHAT-Station
  mosaicHAT+ GNSS antenna + Raspberry Pi + Touch display + Battery + Case
  ☆32Updated 4 years ago
• septentrio-gnss / uBloxCorrectionsWithSeptentrio
  ☆12Updated 8 months ago
• easyrtk / cors_compare
  ☆12Updated 3 years ago
• semuconsulting / pyrtcm
  Python library for parsing RTCM 3 protocol messages.
  ☆92Updated last month
• DoubleString / VrsCaster
  Caster based on rtklib 2.4.3,including self-defined vrs mode
  ☆20Updated 5 years ago
• vasimv / rtkzedf9p
  Simple utility to enable internal RTK mode in Ublox ZED-F9P GPS receiver with RTKLIB-compatible output
  ☆14Updated 6 years ago
• nlsfi / HASlib
  Galileo High Accuracy Service decoder library
  ☆57Updated last year
• PaulZC / ZED-F9P_FeatherWing_USB
  A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.
  ☆23Updated last year
• semuconsulting / pygnssutils
  Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, SBF, RTCM3, NTRIP and SPARTN protocols
  ☆111Updated this week
• CentipedeRTK / pi-gen_RTKbase
  fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images
  ☆22Updated 9 months ago
• sparkfun / SparkFun_RTK_Everywhere_Firmware
  Centimeter precision GPS/GNSS using L1/L2/L5 signals broadcast over Bluetooth, WiFi, and Ethernet.
  ☆35Updated this week
• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆94Updated 6 years ago
• mkameke / ZED-F9P_Raw_Data_Logger
  A raw data logger based on the u-blox ZED-F9P GNSS receiver intended for use with Precise Point Positioning (PPP) and Post-Processed Kine…
  ☆12Updated 5 years ago
• Azurehappen / Virtual-Network-DGNSS-Project
  A virtual network Differential GNSS server-client project using Precise Point Positioning (PPP). Global coverage. Without the needs for p…
  ☆38Updated last year
• septentrio-gnss / mosaicHAT
  Mosaichat: an open source Raspberry Pi HAT based on Septentrio's mosaic-X5
  ☆55Updated last year
• ZhangRunzhi20 / HASPPP
  HASPPP (Galileo High Accuracy Service Precise Point Positioning): an open-source Galileo HAS embeddable RTKLIB decoding package
  ☆29Updated 10 months ago
• osqzss / PocketSDR
  ☆13Updated 3 months ago
• Kanstantsin-Y / GNSS_RTCM_DECODER
  Python decoder for GNSS data in RTCM3 format
  ☆20Updated 6 months ago
• Jin-Whu / gstream
  An open-source GNSS-oriented data stream client library.
  ☆17Updated 2 years ago
• yoronneko / qzsl6tool
  QZS L6 Tool: quasi-zenith satellite L6-band tool
  ☆27Updated 3 weeks ago
• taroz / GNSS-Radar
  GNSS-Radar is a web application to show the current GNSS constellation
  ☆93Updated 10 years ago
• heiwa0519 / RTKSERVER
  A deformation monitoring project based on RTKlib 2.4.3 b34 , use Qt 6.2.1 MinGW 64-bit in Windows and Qt 6.1.2 GCC 64bit in Linux.
  ☆11Updated 3 years ago