Alternatives and similar repositories for aws-robomaker-mini-pupper-application:

Users that are interested in aws-robomaker-mini-pupper-application are comparing it to the libraries listed below

• ntnu-arl / trace_paw
  Repository for Terrain Recognition and Contact Force Estimation through Sensorized Legged Robot Paw
  ☆44Updated last year
• XRobots / ROSremote
  ☆33Updated 3 years ago
• mike4192 / spot_micro_kinematics_python
  A python library for kinematic operations on a spot micro quadruped
  ☆36Updated 2 years ago
• mangdangroboticsclub / MiniPupperDocs
  ☆23Updated this week
• mjbots / hoverbot
  Simple balancing hoverboard robot
  ☆37Updated 2 weeks ago
• belovictor / ros_ddsm115_driver
  Waveshare DDSM115 motor wheel driver for ROS
  ☆16Updated last year
• elpimous / ylo-2
  New quadruped robot, working on UP Xtreme board, and BLDC motors from Mjbots
  ☆25Updated last year
• roaldlemmens / morph
  MORPH : Modular Open Robotics Platform for Hackers
  ☆45Updated 6 years ago
• project-sternbergia / cybergear_m5_ros2
  ☆33Updated last year
• micro-ROS / micro-ROS_openmanipulator_demo
  Provides a demo of micro-ROS based on ROBOTIS OpenManipulator, Olimex STM32 E407 and VL53L1X ToF sensor.
  ☆14Updated 3 years ago
• NDHANA94 / hyperdog_ros2
  HyperDog is a quadruped robot which is fully based on ROS 2 and Micro-ROS
  ☆91Updated 6 months ago
• mangdangroboticsclub / mini_pupper_ros
  ROS 1 & 2 repos based on Mini Pupper legged robots from MangDang
  ☆112Updated 3 months ago
• aaedmusa / OpenQDD-V1
  Open source 3D printed Robotic Actuator
  ☆65Updated last year
• Roboost-Robotics / firmware
  Modular micro-ROS motor control on ESP32 PlatformIO. Roboost Module.
  ☆25Updated 9 months ago
• AGIRobots / PlanetaryGear-3.5xReducer
  Contains the design, documentation, and implementation details for an additional gearbox compatible with the CyberGear motor. It enhances…
  ☆16Updated 8 months ago
• DarrenLevine / TipTap
  A 3d-printed bipedal robot. A low-cost desktop option for semi-direct drive walking research.
  ☆59Updated 4 years ago
• ycheng517 / tabletop-handybot
  A low-cost AI powered robotic arm assistant that listens to your voice commands and can carry out a variety of tabletop tasks.
  ☆65Updated 9 months ago
• Yadunund / mecanum_bot
  ☆49Updated last year
• gbr1 / ros2_amr_interface
  A lightweight interface for AMRs
  ☆14Updated 2 years ago
• raess1 / K3lso-overview
  A Collection of k3lso related repos
  ☆14Updated 3 years ago
• liamondrop / ros-donkey
  Exploring ROS on the Donkeycar Platform
  ☆19Updated 6 years ago
• hippo5329 / linorobot2_hardware
  A fork of the linorobot/linorobot2_hardware project which builds motor controller firmware for teensy, esp32 and pico to control mobile r…
  ☆21Updated last month
• raess1 / dynamixel_spot_arm
  A spot arm clone based on dynamixels
  ☆10Updated 4 years ago
• ROBOTIS-GIT / dynamixel-workbench-msgs
  Message package for dynamixel-workbench
  ☆16Updated last month
• Roboteurs / rbx1-software
  Software to drive a 3D printed robot with a SlushEngine or other motor controller driver
  ☆28Updated 8 years ago
• HarvestX / MG400_ROS2
  Dobot MG400 ROS2 Repository
  ☆28Updated this week
• zlingkang / hd_servo
  ROS package for Arduino servo sequence control
  ☆21Updated 6 years ago
• makerspet / makerspet_loki
  Maker's Pet Loki - a 200mm 3D-printed DIY pet robot compatible with Kaia.ai robotics software platform
  ☆42Updated 2 months ago
• zmk5 / mp_host_setup
  Host computer setup for interfacing with a Mini Pupper over a network
  ☆9Updated last year
• robofoundry / linorobot2_hardware_hippo_esp32_fix
  A fork of linorobot2_hardware with support of esp32 on ROS2 Humble and other devices
  ☆12Updated last year