Alternatives and similar repositories for Circuit_Tree_Designs:

Users that are interested in Circuit_Tree_Designs are comparing it to the libraries listed below

• perehinik / Logic_Analyzer_PCB
  KiCad PCB project of Logic Analyzer
  ☆36Updated 4 years ago
• Werni2A / CadenceOSHW
  Open Source Layouts, Footprints, Schematics, Libraries, ... for Cadence Products
  ☆11Updated 2 years ago
• open-bldc / obldc2-firmware
  Open-Source Brushless Drive Controller Firmware
  ☆26Updated 11 years ago
• Stanlazy / 7z010_ddr
  4-Layer XC7Z010 DDR3 Layout
  ☆15Updated 3 years ago
• FPGA-Computer / UPS
  My HaD UPS + Switch Mode Power Supply repository
  ☆16Updated 6 years ago
• iliasam / STM32F4_phase_laser_rangefinder
  ☆14Updated last year
• antmicro / zynq-video-board
  Open Hardware carrier board supporting modules with Zynq 7000 All Programmable SoC devices.
  ☆56Updated last year
• DieBieEngineering / DieBieCANToUSB
  CAN to USB converter based on the cantact
  ☆12Updated 6 years ago
• SoCXin / RISC-V
  RISC-V Architecture
  ☆19Updated 2 years ago
• martinribelotta / h730duino
  STM32H7 Arduino form factor and software compatible board
  ☆28Updated 3 years ago
• probe-scope / probe-scope-fpga
  FPGA Software for the Probe-Scope
  ☆18Updated 5 years ago
• raphaelchang / infinity-firmware
  Firmware for Infinity brushless motor controllers
  ☆23Updated 4 years ago
• danchouzhou / NuDAC
  A USB sound card based on Nuvoton M482ZGCAE MCU and NAU88L25 I2S audio codec
  ☆9Updated 2 years ago
• armink-rtt-pkgs / micropython
  move to https://github.com/RT-Thread-packages/micropython
  ☆18Updated 6 years ago
• elmot / open-oscilloscope-stm32f3
  Open-Source Oscilloscope based on STM32F3-DISCOVERY board
  ☆33Updated 3 years ago
• eez-open / CF-DIC
  Current-fed dual inductor converter with wide input and output voltage range
  ☆19Updated 5 years ago
• esden / KiBus
  KiCad bus length matching script.
  ☆30Updated 7 months ago
• hansfbaier / ch569-usb3-board
  USB3 super speed development board useful as FPGA expansion based on WCH-Tech CH569
  ☆25Updated 2 years ago
• GraniteDevices / ArgonServoDriveFirmware
  The I/O side ARM MCU firmware for Granite Devices ARGON servo motor drive.
  ☆17Updated 4 years ago
• Stanlazy / ZYNQ_Ruler
  Yet Another XC7Z010 Board
  ☆17Updated 2 years ago
• SoCXin / CH569
  L2 R6: WCH 120MHz RISC-V3A USB3.0 SoC (CH569)
  ☆16Updated last year
• koendv / SerialWireOutput
  Serial Wire Output (SWO) library for STM32duino arm Arduinos
  ☆21Updated last year
• alpelectronics / SmartPower
  USB-C 1-60V Current and Voltage Controlled Power Supply
  ☆18Updated 3 years ago
• antmicro / gmsl-deserializer
  GMSL2 deserializer with MIPI CSI-2 output
  ☆11Updated 3 months ago
• jankae / battery-sim
  A voltage source imitating the behaviour of a battery
  ☆11Updated 5 years ago
• hstarmans / pcb-motor
  Script to generate Carl Bugeja styled PCB motors for KiCad with Python
  ☆13Updated last year
• mvsoliveira / PCBpy
  A Cadence Allegro PCB schematics parser and verification tool. Together with IBERTpy can configure, run, and compile Vivado IBERT eye dia…
  ☆13Updated 3 years ago
• lujji / blackmagic
  In application debugger for ARM Cortex microcontrollers.
  ☆32Updated 7 years ago
• IRNAS / grbl_stm32
  grbl for stm32 with nucleo stepper drivers
  ☆36Updated 8 years ago
• HTCTEK / H7PI_Samples
  Samples project for H7PI，run on qspi flash
  ☆12Updated 4 years ago