Alternatives and similar repositories for RVMT_RTCM-VIA-MQTT-TRANSMITTER:

Users that are interested in RVMT_RTCM-VIA-MQTT-TRANSMITTER are comparing it to the libraries listed below

• Coffeetrac / AG_NTRIP_ESP
  AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)
  ☆38Updated 6 years ago
• charlesquick / ntripcaster-containerised
  Another containerised ntripcaster!
  ☆18Updated 5 months ago
• Node-NTRIP / caster
  Node.js NTRIP caster library with full NTRIP V1/V2 support and more.
  ☆49Updated 2 years ago
• sparkfun / Qwiic_GPS-RTK2
  A breakout board for the ZED-F9P GNSS RTK capable module from u-blox.
  ☆52Updated last year
• mnltake / lvglnavi
  RTK-GPS/GNSS guidance for agriculture tractor using lvgl GUI
  ☆9Updated 2 weeks ago
• easyrtk / cors_compare
  ☆12Updated 3 years ago
• slgrobotics / Esp32_RTK_BaseStation
  Esp32 RTK BaseStation - sends u-Blox ZED-F9P RTCM correction data to rtk2go.com NTRIP caster
  ☆30Updated 2 years ago
• Coffeetrac / Autosteer_ESP
  Advanced Autosteer Sketch for ESP32 - WiFi Version
  ☆38Updated 6 years ago
• nebkat / esp32-xbee
  ESP32 XBee UART Interface
  ☆97Updated 2 years ago
• Archfx / RTK-NTRIP-RTCM
  Contains program to Send RTCM3 📡 data to Hosted NTRIP server and fetch NTRIP data and display on another rover. Real time kinematic supp…
  ☆28Updated 2 years ago
• baidu / ntripcaster
  ☆46Updated 6 years ago
• GLAY-AK2 / NTRIP-client-for-Arduino
  ☆53Updated 5 years ago
• mtz8302 / AOG_GPS_ESP32
  DUAL or SINGLE GPS bridge between AgOpenGPS an GPS receiver. Works with 2 UBlox to calculate heading+roll. Corrects and filters. ESP32 + …
  ☆38Updated last year
• tisyang / ntripcaster
  Ntrip broadcaster written in c and libev
  ☆62Updated 5 years ago
• sparkfun / SparkFun_RTK_Facet
  The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.
  ☆20Updated 6 months ago
• PaulZC / ZED-F9P_FeatherWing_USB
  A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.
  ☆23Updated 8 months ago
• goblimey / ntripcaster
  Docker file and instructions to build and run the BKG NTRIP caster
  ☆102Updated 7 months ago
• aceinnazhangchen / SPARTN_decode
  decode SPARTN message
  ☆15Updated 4 years ago
• goblimey / go-ntrip
  NTRIP Tools
  ☆26Updated 5 months ago
• DoubleString / VrsCaster
  Caster based on rtklib 2.4.3,including self-defined vrs mode
  ☆20Updated 5 years ago
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• Aceinna / rtklib_aceinna
  A version of RTKLIB optimized for single and dual frequency low cost GPS receivers, especially u-blox receivers. It is based on RTKLIB 2…
  ☆15Updated 4 years ago
• tisyang / cors-relay
  CORS系统中继重分发程序
  ☆45Updated 4 years ago
• Aceinna / openRTK330-lib
  OpenRTK330 platform libraries
  ☆21Updated 3 years ago
• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆93Updated 6 years ago
• Node-NTRIP / rtcm
  Decoder/encoder for all RTCM 3 message types up to RTCM 3.3 Amendment 1 (c10403.3).
  ☆44Updated 2 years ago
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆91Updated last month
• jancelin / RTKlibDroid
  Rtklib for android linux (Userland)
  ☆24Updated 4 years ago
• RogerioDoCarmo / GNSS_MobileCalculator
  Android implementation of Standard Point Positioning (SPS) using GPS raw pseudorange measurements.
  ☆15Updated 4 years ago
• ardusimple / simpleRTK2B
  Useful code to work with Ardusimple simpleRTK2B application board
  ☆37Updated 3 years ago