dheera / robot-luxoLinks
☆27Updated 4 years ago
Alternatives and similar repositories for robot-luxo
Users that are interested in robot-luxo are comparing it to the libraries listed below
Sorting:
- Simple balancing hoverboard robot☆49Updated 4 months ago
- A 3d-printed bipedal robot. A low-cost desktop option for semi-direct drive walking research.☆61Updated 4 years ago
- ☆42Updated this week
- Universal remote control for robots. Works via the internet.☆51Updated last year
- Self-balancing robot using hoverboard hub motors☆116Updated 3 years ago
- an easy to modify, 3d printable open source humanoid robot evolved by the community☆51Updated last year
- NE Five ROS Metapackage☆23Updated 10 months ago
- 3D printing and design files☆16Updated 2 years ago
- Python library for the PWM3901 optical flow-rate sensor☆38Updated last year
- SCUTTLE™: Sensing, Connected, Utility Transport Taxi for Level Environments [An open-source Mobile Robot]☆81Updated last year
- All Files to create your own 5DOF robot arm using the Dynamixel XL-330☆27Updated 4 years ago
- SpryDrive is an affordable actuator based on the quasi-direct drive (QDD) scheme. It is composed of a brushless outrunner motor, a low-co…☆39Updated 4 years ago
- ☆76Updated 4 years ago
- Raspberry Pi Pico (RP2040) and Micro-ROS (ROS 2) Integration☆32Updated 4 years ago
- ☆40Updated 4 years ago
- Development of an openmct system for telemetry of ros systems☆22Updated 2 years ago
- MORPH : Modular Open Robotics Platform for Hackers☆45Updated 6 years ago
- ☆76Updated 7 months ago
- StereoPi KiCad schematics☆43Updated 6 years ago
- Dual brushless motor ESC in #M5Stack module format☆30Updated 3 years ago
- Platform firmware for Kaia.ai compatible robots☆37Updated 5 months ago
- ROS controllers for self balancing robot, Bobble-Bot.☆65Updated 3 years ago
- Hardware and Firmware of the Solo Quadruped Master Board☆125Updated last week
- MABEL is a feature-packed, open-source, legged balancing robot based off of the Boston Dynamics Handle robot.☆182Updated 5 years ago
- SpoonereArm3D is a robotic arm with sensors based on arduino.☆14Updated 3 years ago
- Repository for Terrain Recognition and Contact Force Estimation through Sensorized Legged Robot Paw☆45Updated 2 years ago
- Carrier board for Raspberry Pi CM5 with IMU, CAN and Dynamixel support☆19Updated last month
- ☆25Updated 4 years ago
- Firmware for the NearZero Brushless Motor Controller☆46Updated 5 years ago
- Hardware and Software for an Open Source Robotic Leg☆79Updated last year