cjacker / opensource-toolchain-bouffalo-lab
Opensource toolchain for BL602/BL604, BL702/BL704/BL706, BL616/BL618, BL808 and other series of RISC-V based chips from Bouffalo Lab
☆22Updated 5 months ago
Alternatives and similar repositories for opensource-toolchain-bouffalo-lab
Users that are interested in opensource-toolchain-bouffalo-lab are comparing it to the libraries listed below
Sorting:
- OpenBouffalo Firmware Repository☆36Updated last year
- M1s_BL808_example☆70Updated 2 years ago
- Arduino core for the BouffaloLab chips☆28Updated last year
- Opensource embedded controller firmware for sipeed boards.☆39Updated 6 years ago
- This is the OpenOCD source code modified to support WCHlink and CH32Vxxx MCUs, received from MounRiver after my GPL request, and publishe…☆18Updated 2 years ago
- M1s_BL808_Linux_SDK☆31Updated 2 years ago
- A 'missing manual' for the WCH CH32V003 microcontroller factory bootloader☆29Updated 6 months ago
- Load bitstream to AG1K series FPGA using CH552☆12Updated 3 years ago
- M1s(BL808)SDK☆58Updated 2 years ago
- SDK sch&layout reference design and datasheet documention☆60Updated last year
- a cheap CMSIS-DAP debugger by an WCH chip named CH549F☆45Updated 4 years ago
- A modern port of OpenOCD to WCH-Link RISC-V (see project wiki)☆22Updated 3 years ago
- CH32V UF2 bootloader☆46Updated 8 months ago
- 8051 microcontroller☆40Updated 7 years ago
- OpenOCD source code for CH32V series MCUs released by Mounriver IDE☆54Updated 3 years ago
- CMSIS-DAP compliant debugging probe with SWD, JTAG, and VCP support☆33Updated last year
- L4:Cortex A5 GSM SoC RDA8810☆25Updated 5 years ago
- Linux virtual Ethernet driver and utility enabling BL808 Linux to use on-chip Wi-Fi☆23Updated last year
- M0S BL616 example (M0S dock)☆37Updated last year
- 32-bit RISC-V MCU CH32X035 built-in USB PD PHY☆59Updated last month
- CH552 Dual USB to Serial Bridge.☆77Updated 8 months ago
- A binary xPack with the GNU RISC-V Embedded GCC toolchain with support of WCH RISCV CH56x... "WCH-Interrupt-fast"☆14Updated 2 years ago
- ESC(Electronic Speed Controller) source code based on RISC-V CH32☆35Updated last year
- Small hobby computer based on Allwinner's F1C100S (F1C200S) processor☆21Updated 2 years ago
- CH32V305 DAPLink - USB2.0 High Speed DAPLink firmware for the WCH-LinkE☆18Updated 9 months ago
- M0sense_BL702_example☆20Updated last year
- Linux Image for the BL808 CPU by Bouffalo Lab☆19Updated 4 months ago
- The whole NFC solution (source code and schematic&layout) based on WCH chips☆42Updated last year
- A tiny FPGA core module based on GW1NZ-LV1, CH552 and SLG46580☆24Updated 3 years ago
- Arduino core for the BL618☆17Updated last year