Alternatives and similar repositories for M0S_BL616_example:

Users that are interested in M0S_BL616_example are comparing it to the libraries listed below

• sipeed / M1s_BL808_example
  M1s_BL808_example
  ☆70Updated 2 years ago
• sipeed / M1s_BL808_SDK
  M1s(BL808)SDK
  ☆58Updated 2 years ago
• openwch / risc-none-embed-gcc
  Toolchain for CH32duino
  ☆15Updated last year
• sipeed / M1s_BL808_Linux_SDK
  M1s_BL808_Linux_SDK
  ☆31Updated 2 years ago
• openwch / RISC-V_ESC
  ESC(Electronic Speed Controller) source code based on RISC-V CH32
  ☆35Updated last year
• cjacker / opensource-toolchain-bouffalo-lab
  Opensource toolchain for BL602/BL604, BL702/BL704/BL706, BL616/BL618, BL808 and other series of RISC-V based chips from Bouffalo Lab
  ☆22Updated 5 months ago
• bouffalolab / arduino-bouffalo
  Arduino core for the BouffaloLab chips
  ☆28Updated last year
• sipeed / M0sense_BL702_example
  M0sense_BL702_example
  ☆20Updated last year
• Xinyuan-LilyGO / T-FPGA
  The circuit board is an integrated ESP32S3 and FPGA (GW1NSR-LV4CQN48PC6/I5) control chip. With the power management AXP2101 can be used t…
  ☆54Updated 11 months ago
• kaidegit / CMSIS-DAPbyWCH
  a cheap CMSIS-DAP debugger by an WCH chip named CH549F
  ☆45Updated 4 years ago
• gregdavill / CH32V307-makefile-example
  Example Makefile project for the CH32V307
  ☆28Updated 3 years ago
• blueskull / PicoGate
  A tiny FPGA core module based on GW1NZ-LV1, CH552 and SLG46580
  ☆24Updated 3 years ago
• bouffalolab / bl808_linux
  ☆129Updated last year
• openbouffalo / OBLFR
  OpenBouffalo Firmware Repository
  ☆36Updated last year
• r4d10n / micropython-wch-ch32v307
  MicroPython for WCH CH32V307
  ☆35Updated 2 years ago
• SoCXin / CH583
  L1 R1：WCH RISC-V4A BLE SoC (CH583/CH582/CH581)
  ☆17Updated last year
• kprasadvnsi / riscv-openocd-wch
  OpenOCD source code for CH32V series MCUs released by Mounriver IDE
  ☆54Updated 3 years ago
• openwch / ch32x035
  32-bit RISC-V MCU CH32X035 built-in USB PD PHY
  ☆58Updated last month
• diodep / ch55x_jtag
  CH55x USB to JTAG bridge
  ☆131Updated last month
• ElectronicCats / DAP-Cat-Programmer
  An Open-Source CMSIS-DAP Debug Probe based on DAPLink and USB bus convert and it can realize USB convert to serial interface based in CH5…
  ☆94Updated 8 months ago
• Seeed-Studio / Seeed_Arduino_DAPLink
  An open-source DAPLink Arduino Library supports Keil MDK, IAR Embedded Workbench, OpenOCD, and other commonly used IDE.
  ☆35Updated 3 months ago
• bouffalolab / bl_docs
  Datasheets and Reference Manual for BL602/BL808
  ☆148Updated last year
• wuxx / nanoESP32-S3
  ESP32-S3 dev board
  ☆55Updated 2 years ago
• openwch / ch592
  The SDK and HDK for RISC-V Bluetooth LE BLE5.4 CH591/CH592
  ☆48Updated 7 months ago
• openwch / ch32v103
  ☆35Updated 4 months ago
• openwch / usb-jtag-spi
  Single-chip solution for Hi-speed USB2.0(480Mbps) JTAG/SPI Debugger based on RISC-V MCU CH32V30x/CH32V20x
  ☆110Updated last year
• lewisxhe / XPowersLib
  Arduino,CircuitPython,Micropython, esp-idf library for x-powers power management series
  ☆94Updated 3 weeks ago
• wuxx / f1c100s-gpio-tools
  Command-line access to F1C100s GPIO
  ☆24Updated 5 years ago
• espressif / esp32c3-direct-boot-example
  Example of ESP32-C3 (rev. 3 and later) "direct boot" feature.
  ☆75Updated last year
• kinsamanka / milkv-zephyros
  Zephyr OS running on Milk-V Duo secondary processor
  ☆27Updated 8 months ago