Alternatives and similar repositories for bl808_linux

Users that are interested in bl808_linux are comparing it to the libraries listed below

• bouffalolab / bl_docs
  Datasheets and Reference Manual for BL602/BL808
  ☆152Updated 2 years ago
• sipeed / M1s_BL808_example
  M1s_BL808_example
  ☆70Updated 2 years ago
• sipeed / M1s_BL808_SDK
  M1s(BL808)SDK
  ☆57Updated 2 years ago
• jcmvbkbc / linux-xtensa
  Linux port for xtensa architecture. None of these branches are stable.
  ☆165Updated 2 weeks ago
• espressif / esp32c3-direct-boot-example
  Example of ESP32-C3 (rev. 3 and later) "direct boot" feature.
  ☆76Updated last year
• milkv-duo / duo-files
  ☆163Updated 3 months ago
• openbouffalo / buildroot_bouffalo
  Linux Image for the BL808 CPU by Bouffalo Lab
  ☆132Updated last year
• SdtElectronics / Xassette-Asterisk
  Evaluation board for AllWinner's RISC-V 64 SoC F133/D1s
  ☆213Updated 3 years ago
• sipeed / M1s_BL808_Linux_SDK
  M1s_BL808_Linux_SDK
  ☆31Updated 2 years ago
• sanjay900 / ox64-uart
  ☆13Updated last year
• openwch / ch32v20x
  CH32V203 is an industrial-grade enhanced low-power,small-medium capacity general-purpose MCU based on 32-bit RISC-V core
  ☆110Updated 9 months ago
• SmartArduino / Doiting_BL
  BL602 SDK
  ☆67Updated 4 years ago
• openbouffalo / OBLFR
  OpenBouffalo Firmware Repository
  ☆36Updated 2 years ago
• sipeed / Longduino
  Longduino is an Arduino port for gd32v mcu.
  ☆69Updated 3 years ago
• wuxx / nanoCH32V203
  ☆82Updated 2 years ago
• openwch / ch583
  The datasheet/SDK/HDK docmentation of Bluetooth LE RISC-V MCU CH582M/CH583M
  ☆157Updated last week
• bouffalolab / blwnet_xram
  Linux virtual Ethernet driver and utility enabling BL808 Linux to use on-chip Wi-Fi
  ☆23Updated last year
• sipeed / RV-Debugger-BL702
  RV-Debugger-BL702 Project, an opensource debugger implement
  ☆204Updated 9 months ago
• wuxx / nanoCH32V003
  ☆80Updated 3 months ago
• diodep / ch55x_dualserial
  CH552 Dual USB to Serial Bridge.
  ☆78Updated last year
• kprasadvnsi / riscv-openocd-wch
  OpenOCD source code for CH32V series MCUs released by Mounriver IDE
  ☆55Updated 3 years ago
• aappleby / picorvd
  GDB-compatible RISC-V Debugger for CH32V003 that runs on a Raspberry Pi Pico
  ☆222Updated 6 months ago
• xhackerustc / uc-rv32ima
  Run Linux on MCUs such as ESP32C3 with RISC-V emulator
  ☆117Updated last year
• unframework / licheepi-nano-buildroot
  Config files for full Lichee Pi Nano Linux image build
  ☆122Updated last year
• sipeed / platform-gd32v
  GD32V: development platform for PlatformIO
  ☆187Updated 2 years ago
• vowstar / k210-linux-nommu
  K210 run linux nommu (From Damien Le Moal's patch)
  ☆158Updated 2 years ago
• cjacker / opensource-toolchain-bouffalo-lab
  Opensource toolchain for BL602/BL604, BL702/BL704/BL706, BL616/BL618, BL808 and other series of RISC-V based chips from Bouffalo Lab
  ☆24Updated 9 months ago
• sipeed / M0S_BL616_example
  M0S BL616 example (M0S dock)
  ☆38Updated 2 years ago
• bouffalolab / buildroot_bouffalo
  Linux Image for the BL808 CPU by Bouffalo Lab
  ☆19Updated 8 months ago
• tvlad1234 / linux-ch32v003
  Linux on a $0.15 RISC-V microcontroller
  ☆264Updated last year