afnid / CoreEFILinks
An electronic fuel injection program written in c++ to experiment with 1 us resolution on an Arduino, or STM32 Cortex processors.
☆19Updated 8 years ago
Alternatives and similar repositories for CoreEFI
Users that are interested in CoreEFI are comparing it to the libraries listed below
Sorting:
- Free and Open Source MegaSquirt 2 Firmware☆16Updated 12 years ago
- ☆50Updated 5 years ago
- Prometheus board (See http://rusefi.com/forum/viewtopic.php?f=4&t=1215)☆9Updated 5 years ago
- ☆22Updated 7 years ago
- microRusEfi board for rusEfi ECU☆76Updated 7 months ago
- General software for logging and controlling devices. Controlling Modbus, CAN bus via STM32PLC etc☆36Updated 2 months ago
- CAN Bus logger with SD card implemented using ChibiOS☆70Updated 6 years ago
- *on hold * Implement J2534 interface with a cheep Chinese elm327 copy (pic18f25k80)☆17Updated 7 years ago
- STM32 ECU firmware☆25Updated 11 years ago
- User documentation for rusEFI engine control unit☆34Updated this week
- These are reusable libraries. You'll need to include the LSP.h file and remove comment for what you need.☆29Updated 2 weeks ago
- Eagle schematics of inverter main board, sensor boards and gate drivers☆69Updated 2 years ago
- CAN bus gateway over USB☆21Updated 3 years ago
- Yet another USB-CAN adapter.☆12Updated 3 years ago
- ELM327 firmware for pic18f25k80 chip from china clone OBD2 diag boxes☆40Updated 7 years ago
- Open Source CAN bus Analyser and Simulation Software☆62Updated 2 months ago
- ECU designed for Speeduino firmware☆32Updated 5 years ago
- ☆23Updated 6 years ago
- ☆30Updated 8 months ago
- Generalized Electric Vehicle Control Unit☆119Updated 2 years ago
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆60Updated 3 months ago
- ECU using the MPC5634 processor☆11Updated 10 years ago
- ☆17Updated 9 years ago
- Ethernet-CAN converter board based on STM32F407☆24Updated 3 years ago
- slcan firmware for the CVRA CAN to USB dongle☆37Updated 4 years ago
- ☆40Updated 3 weeks ago
- Firmware for the CANtact Pro☆47Updated 2 years ago
- This is the software for running an AC INDUCTION OR PERMANENT MAGNET motor with field oriented control.☆52Updated 8 years ago
- *DEPRECATED* rusEFI prototyping hardware☆11Updated last year
- K-line/Serial/CAN interface and fuel mapper for motorcycles.☆90Updated 5 years ago