Alternatives and similar repositories for GoobySoft

Users that are interested in GoobySoft are comparing it to the libraries listed below

• MHS-Elektronik / CANcool
  Open Source CAN bus Analyser and Simulation Software
  ☆67Updated 8 months ago
• normaldotcom / canblaster
  Utility to forward SocketCAN canbus traffic over UDP to Cangaroo and other applications
  ☆26Updated 2 years ago
• tuna-f1sh / entree
  Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!
  ☆85Updated this week
• mac-can / SerialCAN
  Library for CAN-over-Serial-Line Interfaces (SLCAN Protocol)
  ☆55Updated last year
• ryedwards / budgetcan-fw
  Firmware to support gs_usb on most STM32 devices
  ☆54Updated 4 months ago
• SimonCahill / isotp-c
  An implementation of the ISO-TP (ISO15765-2) CAN protocol in C
  ☆49Updated 2 months ago
• RudolphRiedel / USB_CAN-FD
  This is an Open Source Hardware USB to CAN-FD Interface
  ☆78Updated 2 months ago
• WeActStudio / WeActStudio.USB2CANFDV1
  USB2CANFDV1, 1500V ISO, 5Mbps Max
  ☆76Updated last year
• jgressmann / supercan
  This is project SuperCAN. An open source USB to CAN-FD protocol.
  ☆92Updated 6 months ago
• roboterclubaachen / usb2can
  ☆51Updated 6 years ago
• linklayer / cantact-pro-fw
  Firmware for the CANtact Pro
  ☆49Updated 2 years ago
• rkollataj / mcba_firmware
  Michrochip CAN BUS Analyzer firmware
  ☆22Updated 9 years ago
• DanielMartensson / Easy-CANopen
  A CANopen protocol for all systems such as embedded, PC, etc.
  ☆119Updated last month
• karlyamashita / common_libraries
  These are reusable libraries. You'll need to include the LSP.h file and remove comment for what you need.
  ☆31Updated last month
• marcinbor85 / can-prog
  Command-line tool to flashing devices by CAN-BUS
  ☆90Updated 6 years ago
• astand / uds-to-go
  DoCAN/ISO-TP/UDS lightweight implementation suitable for applications in MCU projects
  ☆35Updated 3 months ago
• DanielMartensson / OpenSourceLogger-Qt
  Open Source Data Acquisition System
  ☆23Updated 3 years ago
• togglebit / CANFDuino
  ☆30Updated 3 months ago
• TDahlmann / canpp
  CAN bus analyzing and simulation GUI tool for Windows.
  ☆79Updated 3 months ago
• marel-keytech / openCANopen
  Open Source CANopen Stack
  ☆62Updated 6 years ago
• cvra / CAN-USB-dongle-fw
  slcan firmware for the CVRA CAN to USB dongle
  ☆37Updated 4 years ago
• linklayer / busmaster
  BUSMASTER is an Open Source Software tool to simulate, analyze and test data bus systems such as CAN. BUSMASTER was conceptualized, desig…
  ☆40Updated 5 years ago
• karlyamashita / CANable_USB_CAN
  Open source project that uses the CANable hardware from protofusion.org
  ☆44Updated 5 months ago
• DanielMartensson / STM32-Ethernet-Camera
  PCB board with camera and ethernet connection + CAN-bus
  ☆13Updated last year
• TheRo0T / CAN-USB-STM32
  ☆67Updated 10 years ago
• walmis / stm32-slcan
  slCAN compatible firmware for STM32f103C8T6
  ☆78Updated 3 years ago
• bdmihai / st-bridge
  ☆13Updated last year
• cvra / can-bootloader
  The bootloader used to flash our CAN-connected boards
  ☆151Updated 2 years ago
• mac-can / SLCAN
  Libray for Lawicel SLCAN Protocol (Serial-Line CAN)
  ☆17Updated 10 months ago
• pierremolinaro / canfd-plugin-for-saleae-logic-analyzer
  CANFD Plugin for Saleae Logic Analyzer
  ☆35Updated last year