fredcooke / FreeMS2
Free and Open Source MegaSquirt 2 Firmware
☆16Updated 12 years ago
Alternatives and similar repositories for FreeMS2
Users that are interested in FreeMS2 are comparing it to the libraries listed below
Sorting:
- Arduino ECU Simulator☆20Updated 5 years ago
- ECU designed for Speeduino firmware☆32Updated 5 years ago
- A 75x78mm speeduino board featuring robotdyn mega 2560 pro microcontroller and all the basics needed to get a 2 channel setup. This is me…☆12Updated 3 years ago
- ☆22Updated 7 years ago
- Megasquirt Gauge using CAN bus.☆35Updated 3 years ago
- Please find my custom Speeduino based ECU.☆18Updated 4 years ago
- ☆10Updated 2 years ago
- Standalone ECU designed for Speeduino firmware☆39Updated 4 years ago
- STM32-based data display and logger for Speeduino SecondarySerial.☆11Updated 3 years ago
- Prometheus board (See http://rusefi.com/forum/viewtopic.php?f=4&t=1215)☆9Updated 5 years ago
- Order a motorized throttle body for gasoline engines with an electronic pedal and an arduino Commander un boitier papillon motorisé des m…☆14Updated last year
- *on hold * Implement J2534 interface with a cheep Chinese elm327 copy (pic18f25k80)☆16Updated 6 years ago
- Arduino Nano based ETC controller implemented with working states☆10Updated 6 years ago
- ECU using the MPC5634 processor☆11Updated 10 years ago
- Dash display project for Megasquirt ECUs based on ESP32 and EVE2☆32Updated 5 years ago
- Standalone ECU designed for Speeduino and RusEFI firmware.☆38Updated last year
- Generalized Vehicle Control Unit for version 6 boards☆25Updated last year
- My version of the Heubner open source electric vehicle motor inverter. All files in Designspark 8 format.☆11Updated 7 years ago
- Speeduino compatible engine control unit (ECU) based around black STM32F407VET6 board.☆47Updated last year
- Hardware is based off an open source project called Speeduino by Josh Stewart.☆15Updated last week
- CAN Bus Bridge / Smart Repeater☆36Updated last month
- Wideband Lambda Controller with Bosch CJ125☆37Updated last year
- 8Ch EGT sensor board to be used with aftermarket ECUs☆31Updated last year
- STM32 ECU firmware☆22Updated 11 years ago
- Automatic Transmission Controller designed by Seaside Customs Garage☆12Updated 6 years ago
- CAN to USB adapter using Lawicel/Canhacker protocol.☆23Updated 5 years ago
- CAN_Interface for ESP32 (Cannelloni Protocol)☆54Updated 4 years ago
- CAN Bus logger with SD card implemented using ChibiOS☆69Updated 6 years ago
- Can Example for Arduino Core STM32☆10Updated 4 years ago
- ☆40Updated 2 months ago