Alternatives and similar repositories for stm32-firmware

Users that are interested in stm32-firmware are comparing it to the libraries listed below

• o5e / o5e_firmware
  ECU using the MPC5634 processor
  ☆11Updated 10 years ago
• krumboeck / usb2can_firmware
  ☆17Updated 10 years ago
• cvra / CAN-USB-dongle-fw
  slcan firmware for the CVRA CAN to USB dongle
  ☆37Updated 4 years ago
• TheRo0T / CAN-USB-STM32
  ☆67Updated 10 years ago
• Zubax / canface_cf1
  High performance CAN-USB/CAN-UART adapter + UAVCAN devboard
  ☆37Updated 3 months ago
• rusefi / rusefi_documentation
  User documentation for rusEFI engine control unit
  ☆42Updated this week
• mach-systems / CANFD-LIN-Gateway
  An STM32CubeIDE project for the CAN-FD LIN Gateway device.
  ☆25Updated 2 years ago
• tuna-f1sh / entree
  Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!
  ☆82Updated last year
• karlyamashita / common_libraries
  These are reusable libraries. You'll need to include the LSP.h file and remove comment for what you need.
  ☆30Updated last week
• jsphuebner / stm32-car
  Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus
  ☆61Updated 7 months ago
• IntergatedCircuits / CanDybugFW
  CAN bus gateway over USB
  ☆21Updated 4 years ago
• fredcooke / FreeMS2
  Free and Open Source MegaSquirt 2 Firmware
  ☆18Updated 12 years ago
• roboterclubaachen / usb2can
  ☆51Updated 6 years ago
• MHS-Elektronik / CANcool
  Open Source CAN bus Analyser and Simulation Software
  ☆67Updated 6 months ago
• MPaulHolmes / AC-Controller
  This is the software for running an AC INDUCTION OR PERMANENT MAGNET motor with field oriented control.
  ☆52Updated 8 years ago
• madprogrammer / stm32-can-bootloader
  STM32 CAN-bus bootloader
  ☆79Updated 9 years ago
• jsphuebner / stm32-sine
  Main firmware of the Huebner inverter project
  ☆181Updated 5 months ago
• DanielMartensson / GoobySoft
  General software for logging and controlling devices. Controlling Modbus, CAN bus via STM32PLC etc
  ☆40Updated this week
• DIVON / AutosarGuiEditor
  ☆11Updated 4 months ago
• vladisenko / USB-CAN
  Yet another USB-CAN adapter.
  ☆13Updated 3 years ago
• jsphuebner / stm32-charger
  Repurposes the openinverter main board as a buck or boost mode charger
  ☆16Updated 2 years ago
• nxyd / libudslin
  Unified Diagnostic Services (ISO-14229) protocol on LIN
  ☆24Updated 3 years ago
• MHS-Elektronik / J1939Display
  Open Source J1939 Data Viewer for the Raspberry Pi
  ☆24Updated 7 years ago
• MikhailBerezhanov / CNCU-01
  Ethernet-CAN converter board based on STM32F407
  ☆25Updated 3 years ago
• darkspr1te / J2534-pic
  *on hold * Implement J2534 interface with a cheep Chinese elm327 copy (pic18f25k80)
  ☆18Updated 7 years ago
• moonglow / kvaser_cantact
  Xvaser LL v2 firmware for CANtact ( CANable ) or any other similar boards.
  ☆49Updated 3 years ago
• RashadShubita / STM32F103_LIN-bus_Example
  ☆26Updated 6 years ago
• mocona05 / CAN-BUS-TO-USB-UART-STM32F042-
  CAN-BUS TO USB-UART(STM32F042)
  ☆24Updated 9 years ago
• jsphuebner / inverter-hardware
  Eagle schematics of inverter main board, sensor boards and gate drivers
  ☆74Updated 3 years ago
• jgressmann / supercan
  This is project SuperCAN. An open source USB to CAN-FD protocol.
  ☆91Updated 4 months ago