WeActStudio / WeAct-TX1_2-CBLinks
The message of WeAct-TX1_2-CB. A carrier board for NVIDIA Jetson TX1/TX2/TX2 4G
☆14Updated 4 years ago
Alternatives and similar repositories for WeAct-TX1_2-CB
Users that are interested in WeAct-TX1_2-CB are comparing it to the libraries listed below
Sorting:
- 动手学ROS2硬件控制篇MicroROS学习板例程☆12Updated 2 years ago
- LDROBOT DTOF LiDAR ROS Package☆30Updated 2 years ago
- Stop the maintenance☆11Updated 3 years ago
- T-Robot是一个DIY的移动机器人,底层采用Micro-ROS☆38Updated 2 years ago
- 用STM32读取BNO085,并将状态数据通过CAN发送出去☆14Updated 5 years ago
- Modeling and Control of Two-Legged Wheeled Robot: In this project, we will be building a two wheeled robot (with a hip and knee joint) wh…☆23Updated 2 years ago
- 菠萝万能控制器,是一个由灯哥开源的,基于Apache开源协议和ESP32主控芯片的低成本四足机器人控制器,控制器集成了全部四足机器人的必须硬件,完美支持 Py-Apple Dynamics 系列开源四足控制软件☆69Updated 3 years ago
- A demo project of how to use Eigen in STM32☆38Updated 4 years ago
- CAN peripheral interface for Intel NUC and other x86 device. 用于英特尔 NUC及其它x86架构的平台CAN的外设接口☆73Updated 2 years ago
- Hardware design for NxPX4☆89Updated last year
- RM3508转接板程序开源☆27Updated 6 years ago
- 基于SimpleFOC官方开源的动量轮倒立摆项目,低成本化和小型化后应用在DengFOC上☆52Updated 3 years ago
- 摆线针式减速器☆43Updated 3 years ago
- ☆20Updated 2 years ago
- Port of SimpleFOC (https://github.com/simplefoc/Arduino-FOC/tree/v2.0.2) to STM32 environment.☆40Updated 4 years ago
- HandsFree OpenRE Tutorial☆65Updated 2 years ago
- The code used in Robocon2019 MR2☆21Updated 5 years ago
- UI for odirve command tool☆28Updated 2 years ago
- ROS 移植到STM32F1平台的机器人底盘驱动程序☆29Updated 5 years ago
- 湖北工业大学竞技机器人队 开源四足机器人☆62Updated 2 years ago
- ROS2-Node for ODrive☆25Updated 3 years ago
- Example of how to setup micro-ROS on any STM32 microcontroller☆104Updated 2 years ago
- BOM, Circuit and PCB Gerber of OpenCR☆120Updated 5 years ago
- BNO080 STM32F4 SPI LL Driver Source Code(Modified Arduino driver originally created by Sparkfun)☆28Updated 4 years ago
- Inertial Sensor Development Kit☆13Updated 7 years ago
- A python library for the YDLidar X2☆11Updated 3 years ago
- Fishbot运动控制程序MicroROS版本☆36Updated last month
- Stepper motor balancing robot project using NodeMCU32S and ESP32CAM coding with C++.☆10Updated 2 years ago
- 📡 C Driver for the ICM-20948 9-Axis Telemetry sensor☆27Updated 3 years ago
- ROS1 package for LDRobotic LD06 Lidar☆39Updated last year