Alternatives and similar repositories for FPGA_Tetris

Users that are interested in FPGA_Tetris are comparing it to the libraries listed below

• evanfrazierc / FPGA-MP3-Player
  ☆12Updated 10 years ago
• rolandbernard / kleine-riscv
  A small and simple rv32i core written in Verilog
  ☆15Updated 3 years ago
• ucsbieee / mapache64
  Custom 6502 Video Game Console
  ☆12Updated 3 weeks ago
• nand2mario / z86
  A pipelined 80286-class FPGA softcore CPU
  ☆23Updated 4 months ago
• sifferman / fpga_screensaver
  This project implements the VGA protocol and allows custom images to be displayed to the screen using the Sipeed Tang Nano FPGA dev board…
  ☆13Updated 2 years ago
• hdl-util / vga-text-mode
  VGA-compatible text mode functionality
  ☆17Updated 5 years ago
• lmEshoo / sp-i586
  soft processor core compatible with i586 instruction set(Intel Pentium) developped on Nexys4 board boots linux kernel with a ramdisk cont…
  ☆34Updated 8 years ago
• b-dmitry1 / V188
  FPGA 80186 IBM PC compatible system for Altera Cyclone IV (EP4CE15F23/EP4CE55F23)
  ☆23Updated 3 years ago
• qubeck78 / tangyRiscVSOC
  RiscV based SOC with 2D and 3D graphics acceleration for Tang Nano 20K
  ☆41Updated last year
• grughuhler / picorv32_tang_nano_20k
  PicoRV32 RISC-V project for Tang Nano 20K FPGA development board
  ☆33Updated last year
• annoyatron255 / m68k
  A Motorola 68000 Computer
  ☆24Updated 6 years ago
• aniketnk / circular-queue-verilog
  Implementation of a circular queue in hardware using verilog.
  ☆17Updated 6 years ago
• PS-FPGA / ps-fpga
  The PS-FPGA project (top level)
  ☆25Updated 4 years ago
• emeb / up5k_6502
  A simple 6502 system built on a Lattice Ultra Plus 5k FPGA
  ☆14Updated 6 years ago
• nand2mario / ddr3-tang-primer-20k
  DDR3 controller for Tang Primer 20K (Gowin GW2A-18C fpga). DDR3-800 speed and low latency.
  ☆63Updated 2 years ago
• PebPeb / Single-Cycle-RV32I
  Single Cycle CPU using the RV32I Base Instruction set
  ☆18Updated 3 weeks ago
• vossstef / tang_nano_9k_vic20_lcd
  Commodore VIC20 core for the Tang Nano 9K FPGA with LCD Output
  ☆11Updated 9 months ago
• DoctorWkt / ULX3S-Blinky
  A blinky project for the ULX3S v3.0.3 FPGA board
  ☆17Updated 6 years ago
• nand2mario / sdram-tang-nano-20k
  NESTang SDRAM controller and usage example for Tang Nano 20K
  ☆48Updated last year
• venomix666 / nano6502
  6502 SoC for the Tang Nano 20k FPGA Board
  ☆22Updated last month
• emeb / up5k_vga
  A complete 65C02 computer with VGA output on a Lattice Ultra Plus FPGA
  ☆29Updated 6 years ago
• Ashwin-Rajesh / RiSC-16
  RiSC 16 is a simple 16 bit instruction set with 8 instructions and 3 instruction formats. This is an RTL implementation in verilog, instr…
  ☆12Updated 3 years ago
• emard / Minimig_ECS
  Minimig project example for FleaFPGA Ohm Experimenter Board
  ☆27Updated 3 years ago
• jacgoudsmit / P1V
  Propeller 1 design and example files to be run on FPGA boards.
  ☆22Updated 6 years ago
• vmunoz82 / ise14
  EDA Tools: Xilinx ISE 14.7 Dockerfile
  ☆21Updated 3 years ago
• jotego / jt89
  sn76489an compatible Verilog core, with emphasis on FPGA implementation and Megadrive/Master System compatibility
  ☆31Updated 10 months ago
• verilog-indeed / nano4k_hdmi_tx
  Open-source HDMI/DVI transmitter for the Gowin GW1NSR-powered Tang Nano 4K
  ☆23Updated 3 years ago
• lawrie / ulx3s_examples
  Example Verilog code for Ulx3s
  ☆42Updated 3 years ago
• abnoname / iceZ0mb1e
  FPGA 8-Bit TV80 SoC for Lattice iCE40 with complete open-source toolchain flow using yosys and SDCC
  ☆59Updated 2 years ago
• mikeakohn / micro68k
  Motorola 68000 (32 bit with unneeded instructions removed) in an FPGA.
  ☆16Updated last year