dzurikmiroslav / esp32-evse
ESP32 EVSE firmware
☆87Updated 3 weeks ago
Alternatives and similar repositories for esp32-evse:
Users that are interested in esp32-evse are comparing it to the libraries listed below
- ESP32 talks via SPI with QCA7005 PLC modem☆20Updated last year
- a ESP32-S3 talks to a QCA7005 to read the SOC of a car☆21Updated last year
- ESP32 Modbus RTU/TCP Gateway☆161Updated 2 months ago
- OpenEVSE V4 WiFi gateway using ESP32☆184Updated last week
- Smart Electric Vehicle Charging Station (EVSE)☆148Updated 2 weeks ago
- DitroniX IPEM ESP32 ATM90E32 ATM90E36 AT24C64 CH340 IoT Power Energy Monitor Board SDK☆20Updated last month
- Smart Electric Vehicle Charging Station (EVSE)☆90Updated 3 months ago
- EV Charger based on ESP32☆12Updated 2 years ago
- Arduino firmware for DehneEVSE charging station☆59Updated 2 years ago
- esp32 port of modbus RTU to TCP Arduino gateway☆63Updated 3 years ago
- Converts the JK-BMS RS485 data to Pylontech CAN data☆75Updated 5 months ago
- Arduino-based Modbus RTU to Modbus TCP/UDP gateway with web interface. Allows you to connect Modbus RTU slaves (such as sensors, energy m…☆182Updated last week
- Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.☆32Updated last month
- ☆117Updated 7 months ago
- OpenEVSE Hardware☆175Updated last week
- CANbus to mqtt bridge using esp32☆44Updated 2 months ago
- PCB with ESP32 and CAN bus. For controlling CAN-devices like heatpumps via ESPHome☆28Updated last year
- ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).☆32Updated last year
- A Modbus RTU (RS-485) to MQTT Gateway (based on ESP32)☆87Updated 10 months ago
- A simple car simulator PCB for testing EVSE.☆48Updated 2 years ago
- ☆32Updated 8 months ago
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆77Updated 3 months ago
- Hardware battery safety controller (BSC)☆26Updated 11 months ago
- ESP32 Manager core☆30Updated 2 months ago
- WT32-ETH01 with tpLink HomePlug modem as CCS charge controller☆24Updated last year
- JK BMS to PYLON CANBUS Protocol converter☆34Updated 2 years ago
- Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)☆42Updated 3 years ago
- Bridge between Wifi and CAN. Minimal variant of the ESP32RET. Using ESP32s3☆24Updated 5 months ago
- A very flexible ESP32 power meter / energy meter with SCT-013-0x0, ZMPT101B, ACS712 sensors☆42Updated last year
- ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems☆161Updated 3 weeks ago