Gripnook / digital-storage-oscilloscopeLinks
An FPGA implementation of a digital storage oscilloscope.
☆26Updated 8 years ago
Alternatives and similar repositories for digital-storage-oscilloscope
Users that are interested in digital-storage-oscilloscope are comparing it to the libraries listed below
Sorting:
- PCB combining Raspberry Pi Pico and iCE40 FPGA☆32Updated last year
- 4-Layer XC7Z010 DDR3 Layout☆17Updated 3 years ago
- Programmable multichannel ADPCM decoder for FPGA☆23Updated 4 years ago
- Fully featured implementation of Inter-IC (I2C) bus master for FPGAs☆28Updated 5 years ago
- Altium PCB project for the Titan PCI Express development card. This card uses the Lattice ECP5 FPGA.☆19Updated 10 years ago
- Sigma-Delta Analog to Digital Converter in FPGA (VHDL)☆16Updated 7 years ago
- Projects published on controlpaths.com and hackster.io☆41Updated 2 years ago
- ☆16Updated 3 years ago
- SpaceVNX (VITA 74.4) carrier based on Zynq-7000.☆13Updated 2 years ago
- Example Hazard3 + OpenDAP RISC-V SWD SoC integration☆9Updated 2 years ago
- OscillatorIMP ecosystem FPGA IP sources☆28Updated last month
- Yet Another XC7Z010 Board☆17Updated 3 years ago
- 🔌 Compact JTAG ("cJTAG") to 4-wire JTAG (IEEE 1149.1) bridge.☆24Updated 3 years ago
- Fork of OpenVeriFla - FPGA debugging logic analyzer to use with your designs - examples (so far) for ice40/IceStorm☆33Updated 6 years ago
- Example Verilog code for Ulx3s☆40Updated 3 years ago
- An 8-layer board in Kicad built upon Xilinx Zynq Chip. Includes sound output, HDMI, DDR3, and Arduino Uno style header for screen connect…☆63Updated 3 years ago
- Adapter board exposing SATA M.2 SSD on FMC board-to-board connector☆12Updated last year
- Mini CPU design with JTAG UART support☆20Updated 4 years ago
- Use ECP5 JTAG port to interact with user design☆30Updated 3 years ago
- Müsli USB Pmod-compatible module☆11Updated 2 years ago
- Lattice HX4K breakout board, designed for hand-assembly☆11Updated 4 years ago
- tools used by project repos to test configuration, generate OpenLane run summaries and documentation☆23Updated 2 weeks ago
- Wishbone controlled I2C controllers☆50Updated 8 months ago
- I2C ROM for EDID (Extended Display Identification Data) on FPGAs☆21Updated 9 years ago
- Open source hardware down to the chip level!☆30Updated 3 years ago
- Quickly update a bitstream with new RAM contents☆15Updated 4 years ago
- Gateware for the Terasic/Arrow DECA board, to become a USB2 high speed audio interface☆21Updated 3 years ago
- WCH CH569 SerDes Reverse Engineering☆26Updated 2 years ago
- A Time to Digital Converter designed for Xilinx 7-Series FPGAs☆28Updated 4 years ago
- Xilinx Virtual Cable Daemon☆20Updated 5 years ago