Alternatives and similar repositories for Arty-Pmod-VGA

Users that are interested in Arty-Pmod-VGA are comparing it to the libraries listed below

• kprasadvnsi / Anlogic_Doc_English
  Translation of Anlogic's FPGA datasheet, manual etc. to English.
  ☆56Updated 7 years ago
• blackmesalabs / hyperram
  Portable Verilog RTL interface to S27KL0641DABHI020 64Mbit HyperRAM IC
  ☆92Updated 7 years ago
• Efinix-Inc / xyloni
  This repo is for Efinix Xyloni development board users. It has projects and software to get you started working with the board.
  ☆45Updated 3 years ago
• tomverbeure / vexriscv_ocd_blog
  Repo that shows how to use the VexRiscv with OpenOCD and semihosting.
  ☆26Updated 3 years ago
• gtjennings1 / HyperBUS
  A basic HyperRAM controller for Lattice iCE40 Ultraplus FPGAs
  ☆63Updated 7 years ago
• QuickLogic-Corp / quicklogic-fpga-toolchain
  Open Source FPGA toolchain and documentation for QuickLogic devices and eFPGA IP
  ☆40Updated 4 years ago
• m-labs / VexRiscv-verilog
  Using VexRiscv without installing Scala
  ☆39Updated 4 years ago
• blackmesalabs / s7_mini_fpga
  Example designs for the Spartan7 "S7 Mini" FPGA board
  ☆29Updated 6 years ago
• gtjennings1 / UPDuino-LH154Q01-Display
  Design to connect Lattice Ultraplus FPGA to LH154Q01 Display
  ☆28Updated 7 years ago
• olofk / observer
  ☆43Updated 5 years ago
• mattvenn / fpga-sram
  mystorm sram test
  ☆29Updated 8 years ago
• MJoergen / HyperRAM
  Portable HyperRAM controller
  ☆65Updated last year
• ultraembedded / core_usb_host
  Basic USB 1.1 Host Controller for small FPGAs
  ☆97Updated 5 years ago
• hdl-util / sdram-controller
  Generic FPGA SDRAM controller, originally made for AS4C4M16SA
  ☆83Updated 5 years ago
• olofk / wb_intercon
  Wishbone interconnect utilities
  ☆44Updated last month
• ChinaQMTECH / QM_XC7A100T_WUKONG_BOARD
  ☆41Updated 2 years ago
• emard / ulx3s-bin
  Quickstart binaries for flashing ULX3S to factory-default state
  ☆26Updated 3 years ago
• nand2mario / ddr3-tang-primer-20k
  DDR3 controller for Tang Primer 20K (Gowin GW2A-18C fpga). DDR3-800 speed and low latency.
  ☆66Updated 2 years ago
• lawrie / ulx3s_examples
  Example Verilog code for Ulx3s
  ☆41Updated 3 years ago
• goran-mahovlic / ulx3s-extensions
  PMOD boards for ULX3S
  ☆48Updated 2 years ago
• ZiyangYE / General-Slow-DDR3-Interface
  A general slow DDR3 interface. Very little resource consumption. Suits for all FPGAs with 1.5V IO voltage.
  ☆38Updated last year
• skristiansson / wb_sdram_ctrl
  SDRAM controller with multiple wishbone slave ports
  ☆30Updated 7 years ago
• splinedrive / my_hdmi_device
  New clean hdmi implementation for ulx3s, icestick, icoboard, arty7, colorlight i5 and blackicemx! With tmds encoding hacked down from dvi…
  ☆107Updated 5 months ago
• QuickLogic-Corp / EOS-S3
  Device description files (architecture, timing, configuration bitstream, and general documentation) for EOS S3 MCU+eFPGA SoC
  ☆27Updated 4 years ago
• matt-kimball / toygpu
  A simple GPU on a TinyFPGA BX
  ☆81Updated 7 years ago
• gregdavill / ecpprog
  Programmer for the Lattice ECP5 series, making use of FTDI based adaptors
  ☆91Updated last year
• tinyvision-ai-inc / UPduino-v2.1
  UPduino
  ☆28Updated 5 years ago
• ZipCPU / s6soc
  CMod-S6 SoC
  ☆45Updated 8 years ago
• no2fpga / no2usb
  Nitro USB FPGA core
  ☆86Updated last year
• Wren6991 / libfpga
  Reusable Verilog 2005 components for FPGA designs
  ☆49Updated last month