Alternatives and similar repositories for pololu-3pi-plus-32u4-arduino-library

Users that are interested in pololu-3pi-plus-32u4-arduino-library are comparing it to the libraries listed below

• jonas-merkle / AS5047P
  An Arduino library for the AS5047P high-resolution rotary position sensor. Supporting also the following sensor types: AS5047D, AS5147, A…
  ☆39Updated 3 months ago
• curiores / SerialAnalyzer
  ☆83Updated 9 months ago
• farrellf / Telemetry-Viewer
  ☆70Updated 9 years ago
• rfetick / Kalman
  Implement Kalman filter for your Arduino projects
  ☆146Updated last year
• stm32duino / LSM6DS3
  Arduino library to support the LSM6DS3 3D accelerometer and 3D gyroscope
  ☆26Updated 4 years ago
• farrellf / Balancing_Robot_Firmware
  ☆53Updated 9 years ago
• timoxd7 / FastRCReader
  A fast and lightweight library to read PWM RC signals from a RC RX (Receiver)
  ☆32Updated 2 years ago
• mprograms / QMC5883LCompass
  QMC5883L Compass is a Arduino library for using QMC5583L series chip boards as a compass. Supports: - Getting values of XYZ axis. - Cal…
  ☆128Updated last year
• ZHomeSlice / Simple_MPU6050
  Going Live
  ☆92Updated 9 months ago
• adafruit / Adafruit_BNO08x
  Arduino library for BNO08x
  ☆73Updated 2 years ago
• jarzebski / Arduino-KalmanFilter
  Kalman Filter for Arduino
  ☆100Updated 8 years ago
• sparkfun / OpenLog_Artemis
  The OpenLog Artemis is an open source datalogger the comes preprogrammed to automatically log IMU, GPS, serial data, and various pressure…
  ☆98Updated last week
• chillibasket / processing-grapher
  Terminal and graphing program for analysis and recording of data from serial devices
  ☆40Updated last year
• 107-systems / 107-Arduino-Cyphal
  Arduino library for providing a convenient C++ interface for accessing OpenCyphal.
  ☆75Updated 3 weeks ago
• drcpattison / ICM-20948
  ICM-20948 port of the MPU-9250 Kris Winer Arduino library
  ☆43Updated 3 years ago
• sparkfun / SparkFun_u-blox_GNSS_v3
  An Arduino library which allows you to communicate seamlessly with u-blox GNSS modules using the Configuration Interface
  ☆93Updated last week
• ZaneL / quaternion_sensor_3d_nodejs
  ☆35Updated 5 years ago
• owennewo / SimpleCAN
  A CAN Bus library for Arduino and other platforms
  ☆13Updated last year
• adafruit / Adafruit_LSM6DS
  Arduino library for LSM6DS
  ☆55Updated last year
• mike-matera / FastPID
  A fast, integer based PID controller suitable for Arduino.
  ☆147Updated 2 years ago
• danielflataker / PIDArduino
  A simple PID library for Arduino
  ☆48Updated 3 years ago
• controllerstech / NRF24L01
  How to Write NRF24L01 Library using the Datasheet
  ☆41Updated 4 years ago
• ZaneL / Teensy-ICM-20948
  Arduino library for the ICM-20948 motion tracking sensor -- with DMP support
  ☆73Updated 4 years ago
• makerbase-motor / MKS-ESP32FOC
  ☆64Updated last year
• CytronTechnologies / CytronMotorDriver
  Arduino library for Cytron motor drivers.
  ☆87Updated 2 years ago
• NicksonYap / XXD-HW30A-ESC-Schematic
  Reverse-engineered schematic of the cheap 30A ESC, XXD HW30A
  ☆61Updated 5 years ago
• PowerBroker2 / ArduPID
  PID library for Arduinos with greater accuracy than the legacy Arduino PID library
  ☆110Updated 9 months ago
• ceva-dsp / sh2-demo-nucleo
  Demo code showing how to interface with BNO080 (or FSP200) using an STM32F411 Nucleo dev board.
  ☆44Updated 2 years ago
• majodi / swarmdrive
  Testbed code for the Swarm Drive (ESP32 based BLDC motor driver board)
  ☆31Updated 5 years ago
• pms67 / ControlSystemDesign-Tutorial
  Control system design - from theory to practical implementation. Code and files to supplement video series.
  ☆51Updated 5 years ago