Alternatives and similar repositories for BL49

Users that are interested in BL49 are comparing it to the libraries listed below

• oelprinz-org / BL49SP
  Wideband Lambda Controller with Bosch CJ125
  ☆42Updated last year
• Autohome2 / dxControl-Gears
  ☆23Updated 7 years ago
• Tjeerdie / SPECTRE
  Speeduino compatible engine control unit (ECU) based around black STM32F407VET6 board.
  ☆50Updated last year
• mck1117 / wideband
  ☆63Updated last month
• pazi88 / 8Ch-EGT
  8Ch EGT sensor board to be used with aftermarket ECUs
  ☆34Updated last year
• rnd-ash / ultimate_nag52
  An open source TCM for Daimlers 722.6 gearbox. Resource repository
  ☆121Updated last year
• Hell-Fire / WidebandO2
  An Arduino sketch for controlling a Bosch LSU 4.9 Wideband Lambda sensor with minimal parts
  ☆82Updated 12 years ago
• merkur2k / MSCan_Gauge
  Megasquirt Gauge using CAN bus.
  ☆35Updated 3 years ago
• BretStateham / arduino-ecu-simulator
  Arduino ECU Simulator
  ☆21Updated 6 years ago
• rusefi / hw_microRusEfi
  microRusEfi board for rusEfi ECU
  ☆84Updated 2 months ago
• handmade0octopus / ds2
  DS2 K-line library for Arduino and ESP32
  ☆52Updated 7 months ago
• joesbox / WBO2-Controller
  WBO2 Controller
  ☆15Updated last year
• Tjeerdie / Peak-And-hold-Driver
  Peak and hold injector driver for low-Z injectors.
  ☆14Updated 2 years ago
• JacekGreniger / stm32-vagcanlogger
  VAGCANLOGGER - KW1281 & VW TP 2.0
  ☆33Updated 11 years ago
• akpc806a / CAN_Bridge
  CAN Bus Bridge / Smart Repeater
  ☆36Updated 7 months ago
• autowp / CANreader
  Android CAN client
  ☆64Updated 8 years ago
• corygrant / dingoPDM
  Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are availabl…
  ☆89Updated last month
• mackelec / meCAN
  CAN (Dual) bus Arduino library for stm32F042, stm32F103, stm32F105, stm32F107, stm32L4, stm32F4
  ☆28Updated 2 years ago
• HeinrichG-V12 / E65_ReverseEngineering
  ☆44Updated 3 years ago
• smartgauges / obd2-bt-stm32
  Firmware for the cheapest can sniffer
  ☆38Updated last year
• laurynas / volvo_linbus
  Volvo LIN bus reader
  ☆98Updated 4 years ago
• corygrant / CANBoard_HW
  Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.
  ☆44Updated 3 months ago
• MagnusThome / esp32_obd2
  An Arduino library for reading OBD-II data from your car over CAN bus
  ☆54Updated last year
• dvjcodec / SCG-ECU-2.0-STM32F407-8x8
  Standalone ECU designed for Speeduino and RusEFI firmware.
  ☆51Updated last year
• morcibacsi / PSASteeringWheelAdapter
  ESP32 based steering wheel adapter for Peugeot and Citroen cars
  ☆36Updated 5 years ago
• mintynet / esp32-slcan
  ESP32 slcan compatible device
  ☆102Updated 4 years ago
• andrewgabler / VolvoDIMLib
  Library to power and control your Volvo DIM/Cluster
  ☆14Updated last year
• ElDominio / ETC_Control
  Arduino Nano based ETC controller implemented with working states
  ☆10Updated 7 years ago
• rusefi / rusefi_documentation
  User documentation for rusEFI engine control unit
  ☆42Updated this week
• robinpipirs / stm32f746-canbus-display
  ☆17Updated 3 years ago