Alternatives and similar repositories for scangauge

Users that are interested in scangauge are comparing it to the libraries listed below

• darkspr1te / elm327_clone
  ELM327 firmware for pic18f25k80 chip from china clone OBD2 diag boxes
  ☆41Updated 7 years ago
• Tjeerdie / SPECTRE
  Speeduino compatible engine control unit (ECU) based around black STM32F407VET6 board.
  ☆51Updated last year
• atc1441 / CustomCanDecoderBox
  ☆42Updated 5 years ago
• nopnop2002 / Arduino-CANBus-Monitor
  mcp2515 canbus module to Monitor Canbus traffic
  ☆42Updated 2 years ago
• autowp / CANreader
  Android CAN client
  ☆64Updated 8 years ago
• oelprinz-org / BL49SP
  Wideband Lambda Controller with Bosch CJ125
  ☆43Updated last year
• kmalinich / dieslg8
  Arduino Uno + Seeed Studio CANBUS + BMW M57 diesel
  ☆46Updated 4 years ago
• omarKmekkawy / Arduino_CANHacker
  This repo for using your Arduino with MCP2515 CAN Interface and CANHacker software
  ☆56Updated 4 years ago
• UnaClocker / DietSquirt
  Low cost DIY open source MegaSquirt derivative.
  ☆16Updated 8 years ago
• TheBigBadWolfClub / GTTurboEcu
  Arduino ODBII ELM327 Emulator - Allows Arduino to act as an OBD2 ELM327 device and responde to PID requests
  ☆67Updated 2 years ago
• atc1441 / arduino-mcp2515
  Arduino MCP2515 CAN interface library
  ☆40Updated 5 years ago
• collin80 / can_common
  Common structures and functionality for CAN libraries
  ☆142Updated last year
• vtl / volvo-ddd
  VOLVO Driver Distraction Display :)
  ☆66Updated 3 years ago
• muki01 / OBD2_K-line_Reader
  OBD2 K-line Reader (ISO9141 and ISO14230) with microcontrollers like ESP32, Arduino
  ☆148Updated 2 weeks ago
• spoonieau / OBD2-ECU-Simulator
  Arduino Uno powered OBD2 ECU Simulator 'Stand alone or qt5 GUI control'
  ☆62Updated 5 years ago
• smartgauges / canbox
  Firmware for canbus boxes
  ☆111Updated 4 months ago
• mintynet / esp32-slcan
  ESP32 slcan compatible device
  ☆103Updated 4 years ago
• BretStateham / arduino-ecu-simulator
  Arduino ECU Simulator
  ☆21Updated 6 years ago
• kahiroka / slcanuino
  USB-CAN(SocketCAN) sketch for Arduino CAN-BUS shield
  ☆138Updated 4 years ago
• danielkucera / esp32-can
  ☆32Updated 3 years ago
• bill57p9 / BMW_ZGW_emulator
  BMW CANbus gateway emulator & proxy
  ☆22Updated 5 years ago
• hackingvolvo / SardineCAN-Arduino
  Arduino firmware for Sardine CAN (Open Source J2534 device)
  ☆87Updated 10 years ago
• coniferconifer / ESP32-ECU-emulator
  ECU emulator by ESP32 with TJA1050 for OBD2 print test
  ☆63Updated last year
• dvjcodec / SCG-ECU-2.0-STM32F407-8x8
  Standalone ECU designed for Speeduino and RusEFI firmware.
  ☆51Updated last year
• abhishekoct18 / allpro
  Open-source ELM327 OBD adapter
  ☆40Updated 9 years ago
• Longan-Labs / Arduino_CAN_BUS_MCP2515
  Arduino CAN Bus library, MCP2515/MCP2551
  ☆154Updated 2 years ago
• Spartelfant / ELM327-BT
  ELM327-based OBD-II Bluetooth interface
  ☆81Updated 5 years ago
• laszlodaniel / ChryslerScanner
  Hardware and software for interfacing Chrysler's legacy CCD/PCI/SCI-bus.
  ☆71Updated last month
• angusjo / leaf-splines
  leaf spline revers engineering
  ☆14Updated 5 years ago
• MagnusThome / esp32_obd2
  An Arduino library for reading OBD-II data from your car over CAN bus
  ☆55Updated last year