Alternatives and similar repositories for CANAnalyzer:

Users that are interested in CANAnalyzer are comparing it to the libraries listed below

• mocona05 / CAN-BUS-TO-USB-UART-STM32F042-
  CAN-BUS TO USB-UART(STM32F042)
  ☆23Updated 8 years ago
• krumboeck / usb2can_firmware
  ☆17Updated 9 years ago
• DieselDuz42 / Arduino-CAN-bus-SD-logger
  Arduino script to log CAN bus information to SD card. Mainly focused on J1939.
  ☆22Updated 4 years ago
• McNeight / arducross
  Arduino based CAN bus reader and logger for vehicle information important to autocross racers
  ☆12Updated 10 years ago
• sebi2k1 / openCanSuite
  ☆30Updated 7 years ago
• cvra / CAN-USB-dongle-fw
  slcan firmware for the CVRA CAN to USB dongle
  ☆36Updated 3 years ago
• vladisenko / USB-CAN
  Yet another USB-CAN adapter.
  ☆12Updated 3 years ago
• MHS-Elektronik / CANcool
  Open Source CAN bus Analyser and Simulation Software
  ☆60Updated 4 years ago
• akpc806a / CAN_Logger
  CAN Bus logger with SD card implemented using ChibiOS
  ☆68Updated 5 years ago
• IntergatedCircuits / CanDybugFW
  CAN bus gateway over USB
  ☆21Updated 3 years ago
• rkollataj / mcba_firmware
  Michrochip CAN BUS Analyzer firmware
  ☆21Updated 8 years ago
• kolyandex / CAN-to-USB-lawicel-for-stm32
  CAN to USB adapter using Lawicel/Canhacker protocol.
  ☆23Updated 5 years ago
• GaoleiBai / lin_sniffer
  Lin bus sniffer
  ☆18Updated 8 years ago
• collin80 / due_wire
  An alternative I2C library for Due with DMA support
  ☆15Updated 7 years ago
• UsbCANConverter-UCCbasic / UCCB_GS_Embedded
  gsusb firmware for USB CAN converter
  ☆14Updated 3 years ago
• Catethysis / CAN-viewer
  A simple CAN to USB bridge for STM32F4
  ☆14Updated 11 years ago
• TheRo0T / CAN-USB-STM32
  ☆63Updated 9 years ago
• MHS-Elektronik / J1939Display
  Open Source J1939 Data Viewer for the Raspberry Pi
  ☆22Updated 7 years ago
• pierremolinaro / acan
  CAN Driver for Teensy 3.1 / 3.2, 3.5 and 3.6
  ☆11Updated 10 months ago
• PhilippFux / ESP32_CAN_Interface
  CAN_Interface for ESP32 (Cannelloni Protocol)
  ☆52Updated 3 years ago
• kangassu / j1850_reader
  OBD2 reader with Arduino Uno supporting SAE J1850 VPW protocol
  ☆13Updated 9 years ago
• collin80 / due_canopen
  CANOpen library for due_can
  ☆11Updated 9 years ago
• roboterclubaachen / usb2can
  ☆44Updated 5 years ago
• megadrifter / Arduino_STM32
  Arduino STM32. Hardware files to support STM32 boards, on Arduino IDE 1.6.5 including LeafLabs Maple and other generic STM32F103 boards. …
  ☆13Updated 6 years ago
• ZakKemble / Car-Rev-Alarm
  DIY Car Rev Alarm and Gear Indicator
  ☆13Updated 7 years ago
• linklayer / cantact-pro-fw
  Firmware for the CANtact Pro
  ☆44Updated last year
• karlyamashita / common_libraries
  These are reusable libraries. You'll need to include the LSP.h file and remove comment for what you need.
  ☆24Updated last month
• akpc806a / CAN_Bridge
  CAN Bus Bridge / Smart Repeater
  ☆33Updated 6 years ago
• collin80 / FirmwareReceiver
  ☆14Updated 8 years ago
• CBBL / CBBL
  CAN Bus Bootloader for STM32 microcontrollers
  ☆15Updated 12 years ago