lupyuen / nuttx-ox64
Apache NuttX RTOS for Pine64 Ox64 64-bit RISC-V SBC (BouffaloLab BL808)
☆40Updated this week
Alternatives and similar repositories for nuttx-ox64:
Users that are interested in nuttx-ox64 are comparing it to the libraries listed below
- Apache NuttX RTOS for Pine64 Star64 64-bit RISC-V SBC (StarFive JH7110)☆25Updated this week
- Apache NuttX RTOS on 64-bit RISC-V Sophgo SG2000 (T-Head C906 / Milk-V Duo S)☆29Updated this week
- Longan RV32 Boards Document☆47Updated 4 years ago
- Minimal code for a 'bare metal' ESP32 program which does not use ESP-IDF. Really just a learning exercise because the ESP-IDF is Apache-l…☆43Updated 5 years ago
- ☆16Updated last year
- OpenBouffalo Firmware Repository☆34Updated last year
- ☆43Updated 3 years ago
- Patched sources/configs for RISC-V Linux with musl-based toolchain targeting 8 MB RAM☆24Updated 2 years ago
- An Ethernet to SPI converter using 7400-series ICs☆64Updated 2 years ago
- Example of ESP32-C3 (rev. 3 and later) "direct boot" feature.☆71Updated last year
- ☆24Updated 3 years ago
- TCC (Tiny C Compiler) for 64-bit RISC-V, compiled to WebAssembly with Zig Compiler☆38Updated 11 months ago
- Smaller standard C libraries for embedded platforms. Based on https://keithp.com/cgit/newlib.git☆13Updated 6 years ago
- ☆13Updated last year
- Run an executable from RAM on a Bouffalo MCU (BL602 or BL808)☆22Updated 2 years ago
- CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs☆16Updated 2 years ago
- Kakao Linux☆32Updated this week
- Port TCC (Tiny C Compiler) to support Risc-V 32 targets (specifically for the ESP32-C3). This project is a work-in-progress and is not cu…☆63Updated last year
- Apache NuttX RTOS in the Web Browser: TinyEMU with VirtIO☆21Updated 10 months ago
- Dfu-utils GD32 fork.☆41Updated 4 years ago
- Wrapper to Sipeed LicheeRV Nezha CM C906 boot0, opensbi, u-boot, kernel with tiny initramfs☆29Updated 2 years ago
- ☆51Updated 3 years ago
- Another size-optimized RISC-V CPU for your consideration.☆56Updated this week
- ☆39Updated last year
- ☆128Updated last year
- Mainline-friendly SPL for D1☆34Updated 2 years ago
- STM32 zig test☆20Updated 2 years ago
- Fork of OpenOCD that has RISC-V microcontroller support☆36Updated 6 months ago
- PCB combining Raspberry Pi Pico and iCE40 FPGA☆32Updated 8 months ago
- TensorFlow Lite for BL602☆11Updated 3 years ago