Alternatives and similar repositories for bl602-docs

Users that are interested in bl602-docs are comparing it to the libraries listed below

• mkroman / awesome-bouffalo
  A curated list of tooling, documentation and other resources for Bouffalo Lab chips
  ☆60Updated 4 years ago
• pine64 / bl602-re
  Reverse engineering of BL602 blobs
  ☆101Updated 2 years ago
• pine64 / bl_iot_sdk
  BL602 SDK (Pine64 fork)
  ☆132Updated 2 years ago
• spacemeowx2 / blflash
  bl602 serial flasher
  ☆56Updated 2 years ago
• stschake / bl60x-flash
  Programming tool for Bouffalo Labs BL602/BL604 chips
  ☆25Updated 5 years ago
• SmartArduino / Doiting_BL
  BL602 SDK
  ☆66Updated 5 years ago
• bouffalolab / bl808_linux
  ☆130Updated 2 years ago
• espressif / esp32c3-direct-boot-example
  Example of ESP32-C3 (rev. 3 and later) "direct boot" feature.
  ☆75Updated 2 years ago
• openbouffalo / buildroot_bouffalo
  Linux Image for the BL808 CPU by Bouffalo Lab
  ☆135Updated 2 years ago
• sipeed / bl602-hal
  Hardware Abstract Layer for BL602 RISC-V WiFi + BLE SoC in embedded Rust
  ☆78Updated 2 years ago
• esmil / gd32vf103inator
  Program the GD32VF103 using C, your favourite editor and make
  ☆51Updated 2 years ago
• bjoernQ / blash
  A tool to flash BL602 via JTAG + serial without pressing buttons / setting jumpers
  ☆12Updated 3 years ago
• smaeul / linux
  Patches include sunxi platform support and various driver fixes
  ☆82Updated 11 months ago
• sipeed / platform-gd32v
  GD32V: development platform for PlatformIO
  ☆189Updated 3 years ago
• bouffalolab / bl_docs
  Datasheets and Reference Manual for BL602/BL808
  ☆158Updated 2 years ago
• NordicPlayground / nrf-doom
  ☆43Updated last year
• riscv-mcu / gd32-dfu-utils
  Dfu-utils GD32 fork.
  ☆43Updated 5 years ago
• renzenicolai / bl602tool
  A tool for flashing BL602 boards, work in progress
  ☆14Updated 5 years ago
• smaeul / bouffalo-loader
  Run an executable from RAM on a Bouffalo MCU (BL602 or BL808)
  ☆25Updated 2 years ago
• lundmar / riscv-gd32vf103-demo
  Simple demo firmware for the RISC-V GD32VF103
  ☆29Updated 5 years ago
• lupyuen / openocd-spi
  OpenOCD that supports SWD over SPI on Raspberry Pi
  ☆46Updated 4 years ago
• sipeed / Longduino
  Longduino is an Arduino port for gd32v mcu.
  ☆69Updated 4 years ago
• loboris / GD32VF_USB_UART_BRIDGE
  USB to UART bridge for GD32VF103
  ☆28Updated 5 years ago
• openbouffalo / OBLFR
  OpenBouffalo Firmware Repository
  ☆38Updated 2 years ago
• SeeedDocument / Sipeed-Longan-Nano
  ☆20Updated 6 years ago
• farpatch / farpatch
  Farpatch debugger software layer, backed by Black Magic
  ☆57Updated 2 weeks ago
• kprasadvnsi / riscv-openocd-wch
  OpenOCD source code for CH32V series MCUs released by Mounriver IDE
  ☆55Updated 3 years ago
• adamgreig / ecpdap
  ECPDAP allows you to program ECP5 FPGAs and attached SPI flash using CMSIS-DAP probes in JTAG mode.
  ☆72Updated 2 years ago
• cyrozap / rv51
  A RISC-V emulator for the 8051 (MCS-51) microcontroller.
  ☆145Updated last year
• blackmagic-debug / bmputil
  A tool for managing and flashing Black Magic Probe firmware
  ☆40Updated 3 weeks ago