Alternatives and similar repositories for ethernet-to-spi

Users that are interested in ethernet-to-spi are comparing it to the libraries listed below

• esynr3z / openocd-svd
  Standalone OpenOCD and CMSIS-SVD based peripheral register viewer written on Python
  ☆33Updated 6 years ago
• openwch / nfc
  The whole NFC solution (source code and schematic&layout) based on WCH chips
  ☆45Updated 2 years ago
• drandyhaas / oshw-active-probe
  2GHz single-ended active probe design
  ☆36Updated 7 months ago
• bouffalolab / bl808_linux
  ☆130Updated last year
• openwch / ch569
  SDK sch&layout reference design and datasheet documention
  ☆65Updated last year
• kprasadvnsi / riscv-openocd-wch
  OpenOCD source code for CH32V series MCUs released by Mounriver IDE
  ☆55Updated 3 years ago
• sipeed / RV-Debugger-BL702
  RV-Debugger-BL702 Project, an opensource debugger implement
  ☆209Updated last year
• openwch / usb-jtag-spi
  Single-chip solution for Hi-speed USB2.0(480Mbps) JTAG/SPI Debugger based on RISC-V MCU CH32V30x/CH32V20x
  ☆118Updated 2 years ago
• hydrausb3 / hydrausb3_fw
  HydraUSB3 (WCH CH569) open source test firmware / examples / libraries to experiment with streaming / high-speed protocols (USB2 HS, USB3…
  ☆86Updated 2 years ago
• openwch / ch32v20x
  CH32V203 is an industrial-grade enhanced low-power,small-medium capacity general-purpose MCU based on 32-bit RISC-V core
  ☆114Updated last year
• wagiminator / ATtiny412-USB-Power-Isolator
  2.5kV Isolator for the USB Power Rail
  ☆51Updated 2 years ago
• kaidegit / CMSIS-DAPbyWCH
  a cheap CMSIS-DAP debugger by an WCH chip named CH549F
  ☆48Updated 4 years ago
• openwch / ch32x035
  32-bit RISC-V MCU CH32X035 built-in USB PD PHY
  ☆68Updated 2 months ago
• kingyoPiyo / RasPico_SHIBAKI_Board
  SFP module test board for Raspberry Pi Pico
  ☆63Updated last year
• wuxx / nanoCH32V003
  ☆84Updated 6 months ago
• aappleby / picorvd
  GDB-compatible RISC-V Debugger for CH32V003 that runs on a Raspberry Pi Pico
  ☆236Updated 10 months ago
• ElectronicCats / DAP-Cat-Programmer
  An Open-Source CMSIS-DAP Debug Probe based on DAPLink and USB bus convert and it can realize USB convert to serial interface based in CH5…
  ☆95Updated last year
• eez-open / modular-psu-firmware
  Firmware for EEZ Bench Box 3 (BB3)
  ☆102Updated last year
• farpatch / farpatch
  Farpatch debugger software layer, backed by Black Magic
  ☆56Updated 2 months ago
• basilhussain / ch32v003-bootloader-docs
  A 'missing manual' for the WCH CH32V003 microcontroller factory bootloader
  ☆62Updated 5 months ago
• newbrain / riscv-openocd-wch
  This is the OpenOCD source code modified to support WCHlink and CH32Vxxx MCUs, received from MounRiver after my GPL request, and publishe…
  ☆18Updated 3 years ago
• esden / bitmagic
  Open Source Logic Analyzers and data Syphons
  ☆83Updated 3 years ago
• NNNILabs / Multislope-3I
  Improved multislope ADC
  ☆34Updated last year
• openwch / ch32v103
  ☆35Updated 11 months ago
• gregdavill / CH32V307-makefile-example
  Example Makefile project for the CH32V307
  ☆28Updated 3 years ago
• Fescron / universal-jlink-adapter
  20 pin SWD/JTAG J-Link to 10 pin (0.1" and 0.05") reconfigurable Cortex-M header with power supply and TagConnect compatibility, as well …
  ☆85Updated 8 months ago
• diodep / ch55x_dualserial
  CH552 Dual USB to Serial Bridge.
  ☆79Updated last year
• xjtuecho / AgmPill
  A low cost FPGA/CPLD dev-board based on AG1280Q48.
  ☆70Updated 5 months ago
• eeucalyptus / ch32v003-temperature
  Using the ch32v003 as a temperature sensor
  ☆18Updated 2 years ago
• westonb / rogowski-relief
  rogowski coil current probe
  ☆203Updated 2 years ago