Alternatives and similar repositories for RtkGps:

Users that are interested in RtkGps are comparing it to the libraries listed below

• CentipedeRTK / RtkBaseVar
  🛰️ 📡 Broadcasting the RTCM3 correction from the nearest RTK base 📍
  ☆19Updated last year
• CentipedeRTK / docs-centipedeRTK
  Documentations de Centipede RTK: le réseau collaboratif de Bases GNSS RTK
  ☆17Updated last week
• CentipedeRTK / pi-gen_RTKbase
  fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images
  ☆20Updated 5 months ago
• jancelin / RTKlibDroid
  Rtklib for android linux (Userland)
  ☆24Updated 4 years ago
• jancelin / rtkbase
  GNSS RTK base station with Raspebrry Pi + UbloxF9P > https://centipede.fr
  ☆14Updated 3 years ago
• CentipedeRTK / centipede
  Centipède: un réseau collaboratif de Bases GNSS RTK low-cost
  ☆50Updated 2 years ago
• sparkfun / SparkFun_Unicore_GNSS_Arduino_Library
  An Arduino library for the UM980 and other Unicore based triband GNSS RTK receivers.
  ☆13Updated 3 weeks ago
• mnltake / lvglnavi
  RTK-GPS/GNSS guidance for agriculture tractor using lvgl GUI
  ☆9Updated 2 weeks ago
• pbeyssac / millipede-caster
  The Millipede NTRIP/RTK caster
  ☆23Updated last week
• sparkfun / SparkFun_RTK_Facet
  The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.
  ☆20Updated 5 months ago
• Tinkerbug-Robotics / TinkerRTKWiFiNetwork
  Arduino sketches for the TinkerRTK base station and rover communicating over a WiFi network
  ☆11Updated last year
• chriskinal / AOG_Teensy_UM982
  UM982 specific AgOpenGPS Firmware
  ☆12Updated 5 months ago
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• Coffeetrac / AG_NTRIP_ESP
  AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)
  ☆38Updated 6 years ago
• sparkfun / SparkFun_RTK_Surveyor
  The hardware and enclosure for the popular centimeter level RTK Surveyor GNSS receiver.
  ☆12Updated 3 months ago
• szigix / YATPGPSDO
  Yet Another TruePosition GPSDO
  ☆15Updated 2 years ago
• osqzss / PocketSDR
  ☆12Updated last week
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆57Updated last year
• emlid / ReachView
  Reach-hosted web-interface for RTKLIB
  ☆59Updated 5 years ago
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆91Updated last month
• slgrobotics / Esp32_RTK_BaseStation
  Esp32 RTK BaseStation - sends u-Blox ZED-F9P RTCM correction data to rtk2go.com NTRIP caster
  ☆30Updated 2 years ago
• fguiet / gnss-rtk
  My own RTK network
  ☆23Updated last year
• p-rott / BLDC-Motorcontroller
  Arduino code for the STEVAL-GMBL02V1 BLDC motorcontroller, using SimpleFOC to modulate the motors
  ☆10Updated 2 years ago
• ISTA-UniBwM / GNSSLogger_old
  ☆13Updated 11 months ago
• iliasam / ESP32_SDR_GPS
  Software GPS receiver for ESP32
  ☆38Updated last year
• easyrtk / cors_compare
  ☆12Updated 3 years ago
• sparkfun / SparkFun_RTK_Everywhere_Firmware
  Centimeter precision GPS/GNSS using L1/L2/L5 signals broadcast over Bluetooth, WiFi, and Ethernet.
  ☆28Updated this week
• PaulZC / ZED-F9P_FeatherWing_USB
  A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.
  ☆23Updated 8 months ago
• lansalot / FreeRTK
  How to set up your own RTK base station
  ☆39Updated last year
• ardusimple / simpleRTK2B
  Useful code to work with Ardusimple simpleRTK2B application board
  ☆37Updated 3 years ago