Alternatives and similar repositories for beagle

Users that are interested in beagle are comparing it to the libraries listed below

• sfgit / FPGA_Arduino_Shield
  FPGA-based shield for Arduino
  ☆72Updated 9 years ago
• DuinoPilot / rgbmatrix-fpga
  Adafruit RGB LED Matrix Display Driver for use with FPGAs (written in VHDL)
  ☆24Updated 12 years ago
• hexagon5un / hackaday_supercon_2019_logic_noise_FPGA_workshop
  Hackaday Supercon 2019 Logic Noise Badge Workshop
  ☆28Updated 5 years ago
• n8vi / pru-dds
  Highly configurable Beaglebone PRU-based DDS
  ☆37Updated 7 years ago
• Poofjunior / HardwareModules
  A collection of portable hardware modules
  ☆27Updated 9 years ago
• embmicro / mojo-arduino
  This is the base code using by the Mojo V3 to load the FPGA and act as a USB to serial port/ADC for the FPGA. This code is intended to be…
  ☆35Updated 6 years ago
• GadgetFactory / Arduino-Soft-Core
  ☆64Updated 11 years ago
• OSHPark / ohs18badge
  Open Hardware Summit 2018 Badge
  ☆20Updated 6 years ago
• mattvenn / ws2812-core
  verilog core for ws2812 leds
  ☆33Updated 3 years ago
• FPGAwars / Platformio-FPGA
  FPGA development in PlatformIO, using the Icestorm opensource toolchain
  ☆21Updated 8 years ago
• scarabhardware / miniSpartan6-plus
  ☆76Updated 10 years ago
• alvieboy / ZPUino-HDL
  ZPUino HDL implementation
  ☆90Updated 6 years ago
• krtkl / snickerdoodle-manual
  snickerdoodle user manual
  ☆56Updated 4 years ago
• tinyfpga / TinyFPGA-A-Programmer
  Low-cost (or free) programmer for TinyFPGA A-Series boards
  ☆41Updated 3 years ago
• OSHChip / OSHChip_V1.0_Docs
  Schematics, Gerbers, Bill of materials
  ☆34Updated 9 years ago
• mattvenn / kicad
  ☆14Updated 5 years ago
• mwelling / beagle-wire
  ICE40 FPGA Cape for Beaglebone
  ☆51Updated 4 years ago
• esden / pretty-eagle-libs
  Eagle libraries pretty footprints...
  ☆39Updated 10 years ago
• peepo / verilog_tutorials_BB
  verilog tutorials for iCE40HX8K Breakout Board
  ☆23Updated 9 years ago
• xobs / ecp5-toolchain
  Open-source ECP5 toolchain, including synthesis, place-and-route, and Risc-V GCC
  ☆63Updated 5 years ago
• erikwilson / import-dxf
  EAGLE ULP for importing vector graphics
  ☆31Updated 11 years ago
• limpkin / capmeter
  ☆21Updated 6 years ago
• lawrie / verilog_examples
  Example code in Verilog for the Blackice II FPGA
  ☆28Updated 5 years ago
• Spritetm / hadbadge2019_protoboard
  Protoboard cartridge for the Hackaday 2019 Supercon badge
  ☆17Updated 5 years ago
• mattvenn / first-fpga-pcb
  FPGA dev board based on Lattice iCE40 8k
  ☆68Updated 4 years ago
• emard / ulx3s-bin
  Quickstart binaries for flashing ULX3S to factory-default state
  ☆26Updated 3 years ago
• 1Bitsy / 1bitsy-examples
  Example projects for the 1BitSy development boards.
  ☆38Updated last year
• OSHPark / OSHPark-Eagle-Tools
  Scripts and tools for Eagle PCB Design software
  ☆50Updated 3 years ago
• ARMinARM / arminarm
  Setup and install for ARMinARM board.
  ☆29Updated 9 years ago
• hydronics2 / HDMI-to-FPGA-to-APA102-Pixels
  Final Project written in Lucid (verilog) for the Mojo FPGA development board. Reads pixels from HDMI and sends pixel data to 22,000 APA10…
  ☆37Updated 5 years ago