Alternatives and similar repositories for SmartEVSE-2

Users that are interested in SmartEVSE-2 are comparing it to the libraries listed below

• SmartEVSE / SmartEVSE-3
  Smart Electric Vehicle Charging Station (EVSE)
  ☆190Updated last week
• SmartEVSE / smartevse
  Smart EVSE Electric Vehicle Charging Station
  ☆99Updated 4 years ago
• uhi22 / pyPLC
  Electric vehicle CCS charging investigations with Python
  ☆207Updated last month
• OpenEVSE / open_evse
  Firmware for Open EVSE
  ☆137Updated 10 months ago
• uhi22 / ccs32berta
  ESP32 talks via SPI with QCA7005 PLC modem
  ☆25Updated 2 years ago
• SunshadeCorp / can-service
  Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.
  ☆35Updated 9 months ago
• PionixPublic / reference-hardware
  BelayBox reference hardware
  ☆58Updated last year
• OpenEVSE / OpenEVSE_PLUS
  OpenEVSE Hardware
  ☆197Updated 8 months ago
• Tom-evnut / SimpBMS
  SimpBMS Documentation
  ☆90Updated 3 years ago
• Sevenstax / FreeV2G
  Python based Host MPU Application for the use with 8DEVICES WHITE-BEET Embedded ISO15118 Module modules to realize IEC/ISO15118 and DIN70…
  ☆64Updated last year
• OpenEVSE / openevse_esp32_firmware
  OpenEVSE V4 WiFi gateway using ESP32
  ☆204Updated this week
• damienmaguire / Chademo-Fast-Charge-Controller
  Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles
  ☆45Updated 4 years ago
• openenergymonitor / open_evse
  Firmware for OpenEnergyMonitor OpenEVSE
  ☆18Updated 3 years ago
• dzurikmiroslav / esp32-evse
  ESP32 EVSE firmware
  ☆113Updated last week
• gonium / EVSE-Car-Simulator
  A simple car simulator PCB for testing EVSE.
  ☆52Updated 2 years ago
• uhi22 / foccci
  Fully Open CCS Charge Controller Interface with QCA7005 PLC modem
  ☆88Updated 5 months ago
• EVerest / EVerest
  Main Repository of EVerest - an EV charging software stack. All main documentation is stored here.
  ☆331Updated 2 weeks ago
• EcoG-io / josev
  The community version of Josev - An Operating System for the V2G charging Stations
  ☆147Updated last year
• SmartEVSE / ESP32-PLC
  a ESP32-S3 talks to a QCA7005 to read the SOC of a car
  ☆27Updated 2 years ago
• uhi22 / ccs32
  WT32-ETH01 with tpLink HomePlug modem as CCS charge controller
  ☆29Updated 2 years ago
• ai-republic / bms-to-inverter
  Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an invert…
  ☆208Updated last week
• SwitchEV / RISE-V2G
  The only fully-featured reference implementation of the Vehicle-2-Grid communication interface ISO 15118
  ☆239Updated 2 years ago
• uhi22 / ccs32clara
  STM32 with QCA7005 as CCS charge controller
  ☆90Updated 2 months ago
• Tom-evnut / TeslaBMSV2
  ☆43Updated 2 years ago
• CurtRod / SimpleEVSE-WiFi
  Brings EVSE WB/DIN into your WiFi
  ☆81Updated 2 years ago
• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆80Updated 2 years ago
• juamiso / PYLON_EMU
  Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)
  ☆45Updated 4 years ago
• gregszalay / evse-charge-controller
  Simple ESP32 firmware for Type2 BEV charging
  ☆15Updated 2 years ago
• EcoG-io / pyslac
  Implementation of the Signal Level Attenuation Characterisation (SLAC) introduced in ISO15118-3
  ☆47Updated 2 years ago
• dalathegreat / EV-CANlogs
  Collection of CAN logs from different electric vehicles
  ☆37Updated 2 weeks ago