Alternatives and similar repositories for openevse_esp32_firmware

Users that are interested in openevse_esp32_firmware are comparing it to the libraries listed below

• OpenEVSE / open_evse
  Firmware for Open EVSE
  ☆134Updated 7 months ago
• OpenEVSE / OpenEVSE_PLUS
  OpenEVSE Hardware
  ☆188Updated 4 months ago
• SmartEVSE / SmartEVSE-3
  Smart Electric Vehicle Charging Station (EVSE)
  ☆171Updated last week
• dzurikmiroslav / esp32-evse
  ESP32 EVSE firmware
  ☆103Updated 2 weeks ago
• SmartEVSE / SmartEVSE-2
  Smart Electric Vehicle Charging Station (EVSE)
  ☆91Updated 8 months ago
• Xinyuan-LilyGO / T-CAN485
  ☆132Updated last month
• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆80Updated last year
• gmasse / esp-modbus-mqtt
  A Modbus RTU (RS-485) to MQTT Gateway (based on ESP32)
  ☆91Updated last year
• zivillian / esp32-modbus-gateway
  ESP32 Modbus RTU/TCP Gateway
  ☆184Updated 7 months ago
• roarfred / MBusMqttLogger
  An M-bus master that poll a meter and logs data to an MQTT server
  ☆52Updated 9 years ago
• openenergymonitor / HeatpumpMonitor
  Open-source Heatpump Monitor
  ☆77Updated last year
• volkszaehler / mbmd
  ModBus Measurement Daemon - simple reading of data from ModBus meters and grid inverters
  ☆266Updated 2 months ago
• voltlog / Valve-Actuator
  ☆101Updated last year
• thorsten-gehrig / KnxTpUart
  This is the library of the KNX-User-Forum Arduino project initiated by thorsten Gehrig
  ☆54Updated 2 months ago
• ai-republic / bms-to-inverter
  Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an invert…
  ☆179Updated last month
• OpenKNX / Kaenx-Creator
  Create your own KnxProd Files with UI.
  ☆87Updated last week
• meatpiHQ / wican-fw
  ☆455Updated last week
• silvanverschuur / ev-charger
  EV Charger based on ESP32
  ☆14Updated 3 years ago
• Tobi177 / venus-chargerybms
  Driver to embed the Chargery BMS to a Venus OS device
  ☆33Updated last year
• CurtRod / SimpleEVSE-WiFi
  Brings EVSE WB/DIN into your WiFi
  ☆81Updated 2 years ago
• Arnold-n / P1P2MQTT
  Monitor and control Daikin/Rotex Altherma heat pumps from Home Assistant directly via the 2-wire P1/P2 thermostat interface. Also enables…
  ☆384Updated 2 weeks ago
• fotherja / EV_Charger
  Arduino Uno Code for EV Charger
  ☆154Updated last year
• simat / BatteryMonitor
  Python code to monitor and log battery data
  ☆107Updated last year
• nmakel / solaredge_meterproxy
  Modbus proxy for SolarEdge inverters and unsupported kWh meters
  ☆34Updated last year
• reaper7 / SDM_Energy_Meter
  reading SDM72 SDM120 SDM220 SDM230 SDM630 modbus energy meters from arduino (esp8266, esp32, avr)
  ☆257Updated 11 months ago
• SunshadeCorp / can-service
  Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.
  ☆33Updated 5 months ago
• thelsing / knx
  knx stack (TP, IP and RF) for arduino and linux, Can be configured with ETS
  ☆308Updated 2 weeks ago
• nickn17 / evDash
  EV dashboard - software for small dev boards connected to the car via obd2 BLE4 or CAN bus.
  ☆149Updated last week
• madsci1016 / SMAVenusDriver
  A driver to integrate SMA SunnyIsland inverters with Victron Venus OS
  ☆17Updated 3 months ago
• budulinek / arduino-modbus-rtu-tcp-gateway
  Arduino-based Modbus RTU to Modbus TCP/UDP gateway with web interface. Allows you to connect Modbus RTU slaves (such as sensors, energy m…
  ☆193Updated 4 months ago