Alternatives and similar repositories for Modbus-GoodWe-DT

Users that are interested in Modbus-GoodWe-DT are comparing it to the libraries listed below

• syssi / esphome-seplos-bms
  ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485
  ☆89Updated last week
• dingo35 / SmartEVSE-3.5
  Smart Electric Vehicle Charging Station (EVSE)
  ☆138Updated this week
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆83Updated last week
• mletenay / home-assistant-pylontech
  Home Assistant custom component for Pylontech (high voltage) BMS accessed via console
  ☆16Updated 10 months ago
• dingo35 / ha-SmartEVSEv3
  Integrate SmartEVSEv3 with HomeAssistant through custom component
  ☆15Updated 2 weeks ago
• freakent / dbus-mqtt-devices
  A driver for Victron VenusOS GX devices to support use of dbus-mqtt/flashmq-mqtt
  ☆134Updated 3 weeks ago
• irekzielinski / Pylontech-Battery-Monitoring
  Adding WiFi monitoring to US2000B and US2000C batteries.
  ☆146Updated 2 years ago
• nyxnyx / esphome-comfoair
  ESPHome configuration to drive Zehnder ComfoAir devices.
  ☆11Updated last year
• zonoskar / Goodwe2PVoutput
  Script to upload Goodwe power invertor data to PVoutput website
  ☆10Updated 3 years ago
• juamiso / PYLON_EMU
  Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)
  ☆43Updated 3 years ago
• jesusrop / esphome_huawei_sun2000
  Read your Huawei Sun 2000 inverter data from Home assistant using Modbus RTU
  ☆51Updated 2 years ago
• mr-manuel / venus-os_dbus-mqtt-solar-charger
  This Venus OS driver gets the data from MQTT and displays it as solar charger.
  ☆21Updated 2 months ago
• serkri / SmartEVSE-3
  Smart Electric Vehicle Charging Station (EVSE)
  ☆74Updated last year
• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆75Updated last year
• nygma2004 / growatt2mqtt
  Growatt Solar Inverter Modbus Data to MQTT Gateway
  ☆158Updated last year
• hidaba / PylontechMonitoring
  Adding WiFi monitoring to US2000B , US2000C , US5000 batteries.
  ☆23Updated this week
• Tertiush / bmspace
  Pace Battery Management System
  ☆54Updated 6 months ago
• syssi / esphome-pace-bms
  ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)
  ☆55Updated last week
• jsphuebner / esp-egycounter
  ☆18Updated last month
• lucode / home-assistant
  ☆38Updated 9 months ago
• syssi / esphome-solax-x1-mini
  ESPHome component to monitor a Solax X1 mini via RS485
  ☆39Updated last week
• byte4geek / SEPLOS_MQTT
  Read data From Seplos BMS and send them to the Home Assistant
  ☆44Updated last year
• willglynn / taptap
  An implementation of the Tigo TAP protocol
  ☆43Updated 3 months ago
• elupus / esphome-nibe
  Esphome components for nibe heat pumps
  ☆83Updated last month
• gabrielpc1190 / Home-Assistant_EPEver-eBox-Wifi-01-MODBUS
  How to extract data from the EPEver TRACER-AN using the eBox-Wifi-01 with Home Assistant
  ☆21Updated 4 years ago
• jantenhove / GoodWeLogger
  ESP8266 based logger for GoodWe inverters. Can upload to pvoutput and publishes MQTT topics
  ☆96Updated last year
• mr-manuel / venus-os_dbus-mqtt-battery
  This Venus OS driver gets the data from MQTT and displays it as battery.
  ☆57Updated 2 weeks ago
• klatremis / esphome-for-deye
  Esphome component for Deye 3 phase inverters for Home Assistant
  ☆166Updated 5 months ago
• bagges / deye-esp32-bridge
  ☆50Updated 2 months ago
• chester4444 / esp-multical21
  ESP8266/ESP32 decrypts wireless MBus frames from a Multical21 water meter
  ☆102Updated last year