OpenEVSE / OpenEVSE_EV_SimulatorLinks
OpenEVSE EV Simulator
☆17Updated last year
Alternatives and similar repositories for OpenEVSE_EV_Simulator
Users that are interested in OpenEVSE_EV_Simulator are comparing it to the libraries listed below
Sorting:
- Do it Yourself through hole boards☆12Updated 8 years ago
- circuit for a minimal EVSE for charging an electric vehicle with the J1772 standard☆11Updated 9 years ago
- Simple ESP32 firmware for Type2 BEV charging☆14Updated 2 years ago
- OpenEVSE Hardware☆197Updated 7 months ago
- ESP32 talks via SPI with QCA7005 PLC modem☆25Updated 2 years ago
- Smart Electric Vehicle Charging Station (EVSE)☆96Updated 2 months ago
- Firmware for Open EVSE☆137Updated 9 months ago
- Smart EVSE Electric Vehicle Charging Station☆99Updated 4 years ago
- Firmware for Open EVSE☆123Updated last year
- J1772 Hydra for Arduino☆16Updated 5 years ago
- Smart Electric Vehicle Charging Station (EVSE)☆187Updated 3 weeks ago
- Retrieve battery diagnostic data from your smart electric drive EV.☆57Updated 3 years ago
- BelayBox reference hardware☆57Updated last year
- A small PBC to simulate the CP and PP signals of an electric vehicle (EV)☆13Updated 4 years ago
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆87Updated 5 months ago
- Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles☆45Updated 4 years ago
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆16Updated 2 years ago
- Electric vehicle CCS charging investigations with Python☆205Updated 2 weeks ago
- ESP32 EVSE firmware☆112Updated last week
- a ESP32-S3 talks to a QCA7005 to read the SOC of a car☆27Updated 2 years ago
- This library is intended for use with the FazCAN shield for Arduino and the Arduino 1.0 (or later) development environment.☆15Updated 10 years ago
- ESP8266 WiFi for OpenEVSE Version 2.x☆78Updated 9 months ago
- OpenEVSE V4 WiFi gateway using ESP32☆204Updated this week
- SIMPBMS code for I3 Modules☆46Updated 2 years ago
- An Arduino based LINBUS stack and signal interceptor/injector.☆195Updated 6 years ago
- Get statistics from your Omnik solar inverter☆16Updated 2 years ago
- Arduino library to add dual LIN support on SAM3X based boards with a TJA1021/TJA1027 transceiver☆117Updated 6 years ago
- Firmware for OpenEnergyMonitor OpenEVSE☆18Updated 3 years ago
- Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.☆35Updated 8 months ago
- ☆25Updated 10 years ago