Alternatives and similar repositories for Sensorbox-2

Users that are interested in Sensorbox-2 are comparing it to the libraries listed below

• SmartEVSE / SmartEVSE-2
  Smart Electric Vehicle Charging Station (EVSE)
  ☆98Updated 4 months ago
• dzurikmiroslav / esp32-evse
  ESP32 EVSE firmware
  ☆118Updated 3 weeks ago
• SunshadeCorp / can-service
  Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.
  ☆36Updated 10 months ago
• Xinyuan-LilyGO / T-CAN485
  ☆147Updated 2 months ago
• craigpeacock / Huawei_R4850G2_CAN
  Example code to communicate with Huawei R4850G2 Power Supply via CAN
  ☆78Updated last year
• nuclearcat / ESP32ETH
  Simple ESP32 with native ethernet using LAN8720 phy, Arduino compatible
  ☆29Updated 3 years ago
• nickn17 / evDash
  EV dashboard - software for small dev boards connected to the car via obd2 BLE4 or CAN bus.
  ☆159Updated 5 months ago
• SmartEVSE / SmartEVSE-3
  Smart Electric Vehicle Charging Station (EVSE)
  ☆194Updated 3 weeks ago
• silvanverschuur / ev-charger
  EV Charger based on ESP32
  ☆15Updated 3 years ago
• botaneta / JKbms_Emu_Pylon
  Emulación del protocolo CANBUS de Pylontech, para comunicación con inversores fotovoltaicos, usando un ESP32
  ☆13Updated 3 months ago
• ArminJo / JK-BMSToPylontechCAN
  Converts the JK-BMS RS485 data to Pylontech CAN data
  ☆97Updated 8 months ago
• Tom-evnut / SimpBMS
  SimpBMS Documentation
  ☆91Updated 3 years ago
• jsphuebner / esp32-web-interface
  ☆20Updated 9 months ago
• OpenKNX / SOM-UP
  The Home of the OpenKNX Soundmodule
  ☆12Updated 2 months ago
• jamiejones85 / ESP32-BMS
  An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.
  ☆16Updated 2 years ago
• damienmaguire / BMW_SBox
  Reverse Engineering of the BMW SBox for use in ev conversion projects
  ☆14Updated 2 years ago
• tomvanklinken / Flatpack2
  ☆12Updated 4 years ago
• Cellgalvano / ESP32_CANViewer
  A ESP32 based CAN interface for your webbrowser
  ☆27Updated 4 years ago
• bres55 / Smart-BMS-arduino-Reader
  ☆63Updated 6 years ago
• kolins-cz / Smart-BMS-Bluetooth-ESP32
  Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy
  ☆117Updated last year
• PhilippFux / ESP32_CAN_Interface
  CAN_Interface for ESP32 (Cannelloni Protocol)
  ☆59Updated 4 years ago
• uhi22 / ccs32berta
  ESP32 talks via SPI with QCA7005 PLC modem
  ☆26Updated 2 years ago
• loopyengineeringco / Daly2Sofar
  ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).
  ☆33Updated 2 years ago
• DitroniX / IPEM-IoT-Power-Energy-Monitor
  DitroniX IPEM ESP32 ATM90E32 ATM90E36 AT24C64 CH340 IoT Power Energy Monitor Board SDK
  ☆28Updated 7 months ago
• latonita / esphome-ina228
  Esphome component for digital power monitors INA228, INA229, INA237, INA238, INA239
  ☆10Updated 5 months ago
• meteosat007 / solar-pylontech
  How to connect to a Sofar HYD3600 Inveter and 2 Pylontech US3000 batteries
  ☆20Updated 5 years ago
• nopnop2002 / esp-idf-can2websocket
  Brows CAN-Frame using esp-idf
  ☆14Updated 3 weeks ago
• garagetinkering / esp32-canbus-sniffer
  ☆66Updated last year
• pierremolinaro / acan-esp32
  An ESP32 CAN 2.0B library
  ☆74Updated 6 months ago
• syssi / esphome-virtual-can-bms
  ESPHome component to emulate a SMA/Victron compatible BMS via CAN bus
  ☆16Updated 3 weeks ago