Alternatives and similar repositories for ev-charger:

Users that are interested in ev-charger are comparing it to the libraries listed below

• Tom-evnut / SimpBMS
  SimpBMS Documentation
  ☆86Updated 2 years ago
• SmartEVSE / SmartEVSE-2
  Smart Electric Vehicle Charging Station (EVSE)
  ☆89Updated 3 months ago
• uhi22 / ccs32berta
  ESP32 talks via SPI with QCA7005 PLC modem
  ☆20Updated last year
• OpenEVSE / OpenEVSE_PLUS
  OpenEVSE Hardware
  ☆173Updated 5 months ago
• sebdehne / DehneEVSE-Firmware
  Arduino firmware for DehneEVSE charging station
  ☆59Updated 2 years ago
• dzurikmiroslav / esp32-evse
  ESP32 EVSE firmware
  ☆85Updated this week
• SunshadeCorp / can-service
  Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.
  ☆32Updated 2 weeks ago
• craigpeacock / Huawei_R4850G2_CAN
  Example code to communicate with Huawei R4850G2 Power Supply via CAN
  ☆64Updated last year
• SmartEVSE / ESP32-PLC
  a ESP32-S3 talks to a QCA7005 to read the SOC of a car
  ☆21Updated last year
• openenergymonitor / open_evse
  Firmware for OpenEnergyMonitor OpenEVSE
  ☆17Updated 2 years ago
• stuartpittaway / diyBMS-CurrentShunt
  Isolated current, voltage and SOC monitor for battery banks up to 85V
  ☆52Updated last year
• SmartEVSE / SmartEVSE-3
  Smart Electric Vehicle Charging Station (EVSE)
  ☆144Updated this week
• Sgw32 / BMSCtl
  ANT BMS (antBMS) control panel on C# with UART capability. I hacked protocol and reverse-engineered it.
  ☆22Updated 4 years ago
• NismoBoy34 / Esp32LeafInverterBridge
  esp32 Based can-bridge with webserver
  ☆17Updated last year
• juamiso / PYLON_EMU
  Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)
  ☆42Updated 3 years ago
• uhi22 / ccs32
  WT32-ETH01 with tpLink HomePlug modem as CCS charge controller
  ☆24Updated last year
• stuartpittaway / diyBMSv4Leaf
  diy BMS version 4 for Nissan Leaf cells
  ☆20Updated 3 years ago
• uhi22 / foccci
  Fully Open CCS Charge Controller Interface with QCA7005 PLC modem
  ☆77Updated 2 months ago
• ferelarg / Seplos3MQTT
  Python script to connect a battery pack using BMS Seplos v3.0 to MQTT
  ☆13Updated 10 months ago
• DitroniX / IPEM-IoT-Power-Energy-Monitor
  DitroniX IPEM ESP32 ATM90E32 ATM90E36 AT24C64 CH340 IoT Power Energy Monitor Board SDK
  ☆20Updated 2 weeks ago
• Ackmaniac / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆15Updated 4 months ago
• Xinyuan-LilyGO / T-CAN485
  ☆115Updated 7 months ago
• OpenEVSE / openevse_esp32_firmware
  OpenEVSE V4 WiFi gateway using ESP32
  ☆182Updated this week
• flip555 / bms_connector
  BMS Connector Integration for Home Assistant
  ☆9Updated 9 months ago
• nsayer / hydra
  J1772 Hydra for Arduino
  ☆16Updated 5 years ago
• openenergymonitor / HeatpumpMonitor
  Open-source Heatpump Monitor
  ☆77Updated 10 months ago
• Tobi177 / venus-chargerybms
  Driver to embed the Chargery BMS to a Venus OS device
  ☆32Updated last year
• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆73Updated last year
• sebdehne / DehneEVSE-Hardware
  DehneEVSE - EV Type 2 Charging station
  ☆14Updated 3 years ago