Alternatives and similar repositories for usb_t1s_bridge

Users that are interested in usb_t1s_bridge are comparing it to the libraries listed below

• Werni2A / CadenceOSHW
  Open Source Layouts, Footprints, Schematics, Libraries, ... for Cadence Products
  ☆12Updated 2 years ago
• ThingSet / thingset.github.io
  Website and protocol specification
  ☆14Updated 5 months ago
• UsbCANConverter-UCCbasic / UCCB_GS_Embedded
  gsusb firmware for USB CAN converter
  ☆15Updated 3 years ago
• krumboeck / usb2can_firmware
  ☆17Updated 9 years ago
• geolink / opentracker-hardware
  OpenTracker PCB related files
  ☆16Updated 7 years ago
• ThingSet / thingset-device-library
  ThingSet library for resource-constrained devices written in C/C++
  ☆15Updated 2 years ago
• UsbCANConverter-UCCbasic / UCCBPCB
  Printed circuit board for UCCB
  ☆8Updated 2 years ago
• ArrowElectronics / 10BASE-T1L-MC
  ☆13Updated last year
• embetrix / meta-stm32mp15x
  OpenEmbedded/Yocto BSP layer for STM32MP15x based MPUs
  ☆15Updated 4 months ago
• danchouzhou / NuDAC
  A USB sound card based on Nuvoton M482ZGCAE MCU and NAU88L25 I2S audio codec
  ☆10Updated 2 years ago
• Lora-net / lora_edge_tracker_ref_design
  Demonstration application for LoRa Edge tracker reference design - compatible with LoRa Basics Modem-E
  ☆18Updated 9 months ago
• antmicro / gmsl-deserializer
  GMSL2 deserializer with MIPI CSI-2 output
  ☆18Updated 3 months ago
• saleae / can-analyzer
  Saleae Controller Area Network (CAN) Analyzer
  ☆23Updated 2 weeks ago
• ketszim97 / USB_PD_Sink
  USB Sink based around the STUSB4500
  ☆27Updated 4 years ago
• Lora-net / sx1302_spi_usb_bridge
  Source code of the STM32 MCU which acts like a USB-SPI bridge on a sx1302/sx1303 USB Corecell gateway.
  ☆20Updated 4 years ago
• michahoiting / rv-link
  RV-Link: In application debugger for RISC-V micro-controllers, RISC-V emulator, running on RISC-V development boards (e.g. Sipeed Longan …
  ☆29Updated 4 years ago
• jankae / battery-sim
  A voltage source imitating the behaviour of a battery
  ☆12Updated 6 years ago
• openwch / ch34x
  CH340, CH343, CH342, CH344,CH348
  ☆35Updated 2 years ago
• OLIMEX / ESP32-P4-DevKit
  Development board for ESP32-P4 Dual core RISCV processor from Espressif
  ☆29Updated last month
• linklayer / cantact-pro-fw
  Firmware for the CANtact Pro
  ☆47Updated 2 years ago
• cfriedt / greybus-for-zephyr
  Greybus Module for the Zephyr Real-Time Operating System
  ☆7Updated 3 years ago
• nxp-appcodehub / ap-ml-state-monitor
  This software pack enables developers to develop and deploy neural networks on MCU-based systems for building smart sensing applications.…
  ☆12Updated 11 months ago
• ThomasVDD / SmartSupplyMini
  ☆15Updated 6 years ago
• tumanako / tumanako-inverter-fw-motorControl
  ☆23Updated 6 years ago
• cortexprog / cortexprogfw
  ☆28Updated 4 years ago
• tiagocoutinho / sinstruments
  Simulate any equipment (multimeter, oscilloscope, detectors, motors) over tcp, udp or serial line
  ☆31Updated 4 months ago
• raphaelchang / infinity-firmware
  Firmware for Infinity brushless motor controllers
  ☆24Updated 4 years ago
• lucasdietrich / zephyr-caniot-controller
  Personal gateway/controller for CAN/BLE devices supporting CANIOT custom application protocol. Based on nucleo_f429zi and Zephyr RTOS.
  ☆13Updated 8 months ago
• SimonCahill / isotp-c
  An implementation of the ISO-TP (ISO15765-2) CAN protocol in C
  ☆36Updated 2 months ago
• mfolejewski / OSHW
  My Open Source Hardware (OSHW) projects
  ☆17Updated 4 years ago