Icenowy / h3-arisc-shutdown
Shutdown handler firmware to Allwinner H3's AR100 OpenRISC core
☆10Updated 7 years ago
Alternatives and similar repositories for h3-arisc-shutdown:
Users that are interested in h3-arisc-shutdown are comparing it to the libraries listed below
- ☆13Updated 9 years ago
- Mali OpenGL ES userspace libraries for Allwinner SoCs☆57Updated 6 years ago
- A dualboot Linux/Android smartphone for IOT project, included 3D printed case☆17Updated 2 years ago
- Free Libre Open-Source/-Hardware JTAG/UART adapter based on FTDI2232H☆31Updated 8 years ago
- PCBs designed by Icenowy☆27Updated 3 years ago
- Mali-400 kernel drivers for external compilation for use with linux-sunxi kernel.☆23Updated 12 years ago
- Buildroot for the LicheePi Zero board☆35Updated 7 years ago
- Raspberry PI bare metal☆47Updated 11 years ago
- Implement Silabs C2 flash protocol via ARM and AVR☆32Updated 10 years ago
- Configuration overlays of Xtensa cores used by Espressif. These overlays are applied when building GCC, Binutils, GDB, Newlib.☆10Updated 2 years ago
- advanced u-boot (for sunxi Orange Pi Zero | Zero Plus2 h3 | R1, and another sunxi boards ), ready for full load linux from spi-flash, i2c…☆35Updated 5 years ago
- GPIO over usb board based on vusb AVR stack☆19Updated last year
- Userspace utility to set sunxi disp2 HDMI resolution via ioctl☆21Updated 7 years ago
- Allwinner-Official-Documents☆22Updated 9 years ago
- AVR-based IR interface for lircd☆29Updated 4 years ago
- Linux source for Allwinner/Boxchip F20 (sun3i), A10 (sun4i), A12/A13/A10S (sun5i) and A20 (sun7i) SoCs☆13Updated 5 months ago
- Port Allwinner xradio driver to mainline Linux.☆23Updated 7 years ago
- MuxPi is an open hardware and open software board which was designed to aid in automating tasks on physical devices. Initial goal was to …☆17Updated 3 years ago
- Open source code base for ARM Cortex M3 LPC1347 or Cortex M0 LPC11U37/LPC11U24 MCUs☆55Updated 9 years ago
- Reverse engineered reimplementation of the CSR USB<>SPI converter device on a Stellaris Launchpad. Will work with the original CSR driver…☆57Updated 11 years ago
- Schematics for BananaPi -BPI Products☆12Updated 9 years ago
- USB HID Sensor implementation for PIC16F1454 and STM32F072☆35Updated 2 years ago
- Display Parallel Interface HAT (Hardware Attached on Top) for Raspberry Pi☆18Updated 4 years ago
- SW-DP (Serial Wire Debug Port) Analyzer plugin for the Saleae Logic☆11Updated 4 years ago
- Boot-time Allwinner FEX to Device Tree translator☆16Updated 8 years ago
- ESP8266-based I2S-output WS2812(B) Driver☆51Updated 9 years ago
- SPI kernel driver for ESP8089 devices☆15Updated 10 years ago
- Library for STM8 microcontroller☆19Updated 9 years ago
- Reimplementation of serprog-duino based on the original flashrom serprog interfacing code (now libfrser).☆72Updated last year
- A libusb based programming tool for 24Cxx serial EEPROMs using the WinChipHead CH341A IC☆41Updated 5 years ago