Freenove / Freenove_Hexapod_Robot_Kit
Apply to FNK0029, FNK0031
☆61Updated 4 months ago
Alternatives and similar repositories for Freenove_Hexapod_Robot_Kit:
Users that are interested in Freenove_Hexapod_Robot_Kit are comparing it to the libraries listed below
- Apply to FNK0052☆137Updated last week
- ☆36Updated 7 years ago
- Capers II is a hexapod robot with three degrees of freedom per leg.☆52Updated 7 years ago
- Code I ported to run on Raspberry Pi including Phoenix code☆36Updated 7 years ago
- Arduino Library to control R/C ESC's☆63Updated last year
- Library and UI to configure and control LewanSoul LX-16A servos☆65Updated 2 years ago
- This project showcases a series of code (mainly Python) towards creating an autonomous drone using Raspberry Pi Pico. This project also s…☆23Updated 2 months ago
- Code for a hexapod robot☆87Updated 5 years ago
- Pololu Maestro Servo Controller library for Arduino☆43Updated 4 years ago
- ☆33Updated 3 years ago
- Simple ESP32-Arduino library to operate LX-16A serial servos☆24Updated last year
- ☆26Updated 4 years ago
- Code and STL files for small 18 servo hexapod.☆29Updated last year
- Code you can use to solve forward / inverse kinematics and generate walk sequences of hexapod robots☆48Updated 4 years ago
- Contains code for 3DoF and 4Dof hexapod robots☆5Updated last year
- ☆45Updated 6 years ago
- Arduino library for Dynamixel XL-320 servos☆37Updated last year
- ☆20Updated 3 years ago
- quadrupedal robot using esp32☆47Updated 3 months ago
- Dynamixel controller for AX-12A/W, XL-320 with IMU and BT☆13Updated 10 months ago
- ☆58Updated 2 weeks ago
- Voice Control Robot☆10Updated 5 years ago
- This 6-Axis Desktop Robotic Arm is controlled by a Raspberry Pi with a web interface☆47Updated last year
- Source code of project rover tracks: https://www.thingiverse.com/thing:3112734☆11Updated 6 years ago
- Apply to FNK0028☆11Updated 2 years ago
- ☆129Updated 6 months ago
- ☆13Updated 9 years ago
- Simple Arduino library to operate LX-16A, LX-224 and LX-15D serial servos☆61Updated last year
- Set up ROS, OpenCV and other ROSbots modules for your ROBbots robot☆99Updated 5 years ago
- A 3D printed balancing robot☆73Updated 7 years ago