Alternatives and similar repositories for motorsportdatalogger

Users that are interested in motorsportdatalogger are comparing it to the libraries listed below

• ClintonFlowers / FSAE-Dashboard
  CAN-based Formula SAE / FSAE race car dashboard with data logging
  ☆12Updated 6 years ago
• kevinhughes27 / arduinoDAQ
  use the Arduino as a DAQ with this arduino program and companion python gui
  ☆22Updated 7 years ago
• analoghan / CAN_Gauges
  Arduino/Teensy CAN Gauges with OLED displays
  ☆17Updated 7 years ago
• brendan-w / pihud
  Configurable heads up display fit for the Raspberry Pi
  ☆47Updated 9 years ago
• ptmotorsport / PTSL1-CANbus-Shiftlight
  CANbus shift light, works with Neopixels and MCP2515 to make a shiftlight that works over CAN.
  ☆19Updated 11 months ago
• Billwilliams1952 / microVIEW
  PiCamera graphical user interface for the Raspberry PI - optimized for touchscreen. Written in Python using Tkinter.
  ☆17Updated 5 years ago
• techie66 / CANSerial
  Serial port emulation over CAN bus
  ☆30Updated 3 years ago
• drkmsmithjr / SENTforPiPython
  A python script to receive Single Edge Nibble Transmission (SENT) protocol using python and the Raspberry Pi Zero
  ☆24Updated 4 years ago
• rahulsarchive / 4AxisFoamCutter
  An open-source DIY 4 Axis Foam cutter using Ramps + Arduino for cutting RC Wing Cores.
  ☆95Updated 4 years ago
• sebi2k1 / openCanSuite
  ☆31Updated 8 years ago
• serj331 / stcam
  rpi zero w & seek thermal
  ☆17Updated 6 years ago
• thatlarrypearson / telemetry-obd
  Telemetry OBDII (Onboard Diagnostic Data 2) Logger
  ☆24Updated 8 months ago
• makerplane / pyEfis
  Electronic Flight Information System in Python
  ☆75Updated 8 months ago
• introlab / OpenIMU-MiniLogger
  OpenIMU - Open Hardware Mini Logger based on ESP32
  ☆43Updated 3 years ago
• sparkfun / Qwiic_OpenLog
  Open source I2C based datalogger. The bigger, better cousin to the original serial OpenLog.
  ☆24Updated 2 years ago
• indeterminatedesign / DynamicBalancer
  I came up with a design for a 3D printed Dynamic Spin Balancer using an ESP32, an MPU6050 and a hall sensor to help balance out my wheels…
  ☆17Updated 4 years ago
• rotoye / batmon_reader
  Microcontroller files to access the Batmon battery monitor
  ☆24Updated 3 months ago
• Mathews2115 / TeslondaDash
  Front-end for the Teslonda Super Car Dash
  ☆28Updated 4 years ago
• beyerch / DHP_Kepler
  Automotive Vehicle Interface Hardware (CAN / VPW / A2D / BT 4.1 / USB / SDCARD)
  ☆40Updated 7 years ago
• tonton81 / IFCT
  IFCT - Improved FlexCAN Teensy Library
  ☆12Updated 7 years ago
• pierremolinaro / acan
  CAN Driver for Teensy 3.1 / 3.2, 3.5 and 3.6
  ☆11Updated last year
• autosportlabs / RaceCapture-Pro_firmware
  Firmware for RaceCapture-Pro Data Acquisition, control and Telemetry system for motorsports
  ☆79Updated 3 years ago
• chriskinal / AOG_Teensy_UM982
  UM982 specific AgOpenGPS Firmware
  ☆14Updated 8 months ago
• collin80 / GEVCU
  Generalized Electric Vehicle Control Unit
  ☆117Updated 3 years ago
• jimwhitelaw / ELMulator
  Arduino ODBII ELM327 Emulator - Allows Arduino to act as an OBD2 ELM327 device and respond to PID requests
  ☆36Updated 6 months ago
• sean132 / FSAE-Lapsim
  FSAE Car simulation and optimization, UC Berkeley Formula SAE. Builds off work by Tony Lu and George Pearman
  ☆13Updated 6 years ago
• sparkfun / SparkFun_RTK_Facet
  The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.
  ☆21Updated last year
• novaspirit / oap_start_stop
  ☆82Updated 4 years ago
• karlyamashita / common_libraries
  These are reusable libraries. You'll need to include the LSP.h file and remove comment for what you need.
  ☆31Updated last month
• rin67630 / Soft-Power-MPPT
  Solar-Booster: the different MPPT Solar Charge Controller
  ☆28Updated 3 years ago