Alternatives and similar repositories for IV_Swinger

Users that are interested in IV_Swinger are comparing it to the libraries listed below

• sparkfun / Qwiic_OpenLog
  Open source I2C based datalogger. The bigger, better cousin to the original serial OpenLog.
  ☆24Updated 2 years ago
• petersdw1 / Battlab-One
  A New Tool for Estimating and Optimizing Battery Life for Your Next Internet of Things Project
  ☆63Updated 2 years ago
• todbot / arduino-i2c-scanner
  Simple Arduino I2C scanner as described at http://todbot.com/blog/2009/11/29/i2cscanner-pde-arduino-as-i2c-bus-scanner/
  ☆76Updated 9 years ago
• kaktus85 / MightyWattR3
  Resources for MightyWatt R3 electronic load
  ☆31Updated 2 months ago
• PaulStoffregen / FreqMeasureMulti
  Measures the elapsed time during each cycle of up to 8 input frequencies.
  ☆35Updated 4 years ago
• JAndrassy / my_boards
  My Arduino boards custom variants. You can use it as starting point for your boards specialities.
  ☆18Updated last year
• bertrik / ElectronicLoad
  Arduino software for an electronically controlled load, based on a STM32 microcontroller
  ☆21Updated 4 years ago
• krdarrah / ESP32_GUI_Programmer
  Processing Based GUI for Programming ESP32 modules based on espota.py
  ☆56Updated 5 years ago
• watterott / ESP-WROOM-Breakout
  Breakouts for ESP8266 and ESP32 WiFi/WLAN + Bluetooth modules from Espressif (ESP-WROOM-02, ESP-WROOM-32)
  ☆35Updated 6 years ago
• PaulStoffregen / FreqMeasure
  Measures the elapsed time during each cycle of an input frequency.
  ☆74Updated 3 years ago
• galacticstudios / Logic-Meter
  ☆43Updated 4 years ago
• AnalogLamb / esp32
  Every thing about ESP32
  ☆22Updated 7 years ago
• particle-iot / boron
  Hardware design files for Particle Boron
  ☆34Updated 6 years ago
• dilshan / ir-clone
  Open-source infrared remote control signal analysis and generating tool
  ☆55Updated 3 years ago
• adafruit / Adafruit-MicroLipo-PCB
  PCB files for Adafruit Micro LiPo battery charger
  ☆43Updated 3 years ago
• sleemanj / ArduinoOrientedChipPinoutCreator
  A quick-and-dirty tool to create pinout diagrams of a Microcontroller (2 sided or 4 sided) IC from a JSON based description of the IC
  ☆33Updated 5 years ago
• mike-rankin / ESP32_CoinCell_Color_TFT
  Based off of the CoinCell Board but with more sensors and a 80x160 ST7735 color tft lcd
  ☆58Updated 4 years ago
• beast-devices / ant2-usb-c-lipo-charger
  Tiniest USB-C LiPo charger
  ☆35Updated 3 years ago
• Miceuz / triac-bloc
  An universal power block based on triac. In essence this is a solid state relay with some bells and whistles
  ☆50Updated 5 years ago
• DangerousPrototypes / Sick_of_Beige
  ☆28Updated 10 years ago
• IoTDevicesCH / LoraMidiAtmega1284P
  Small Lora(WAN) board using an Atmega1284P chip and RFM95 module
  ☆20Updated last year
• estechnical / reflowOvenController
  ESTechnical Reflow Oven Controller source code and instructions
  ☆47Updated 10 years ago
• septillion-git / QC2Control
  Set the voltage of a Quick Charge 2.0 source via the Arduino.
  ☆68Updated 8 years ago
• psychogenic / SerialUI
  A Serial User Interface for embedded devices, namely Arduinos.
  ☆50Updated 6 years ago
• chatelao / MiniPirate
  Arduino Serial Command Tool
  ☆66Updated 7 years ago
• zumbik / Eagle-Libraries
  ☆97Updated 10 years ago
• jrsikken / ElectronicLoadR3
  Hardware of Jasper's Electronic Load R3
  ☆28Updated 7 years ago
• gregdavill / obsidian-boa
  Compact ESP32-S2 development board.
  ☆103Updated 4 years ago
• OLIMEX / ESP32-PRO
  ESP32 IoT board with 4MB external RAM, 4MB external Flash, LiPo charger, external crypto engine USB-OTG
  ☆51Updated last year
• neubauek / CircuitBrains
  ☆49Updated 2 years ago