Alternatives and similar repositories for acan

Users that are interested in acan are comparing it to the libraries listed below

• tonton81 / IFCT
  IFCT - Improved FlexCAN Teensy Library
  ☆12Updated 7 years ago
• connorwm / J1850VPW
  Arduino Code (eventually library) for communicating with J1850 VPW OBD-II equipped cars.
  ☆21Updated 10 years ago
• collin80 / FlexCAN_Library
  Arduino library for CAN on Teensy 3.1, 3.2, 3.5, and 3.6
  ☆118Updated 4 years ago
• sebi2k1 / openCanSuite
  ☆31Updated 8 years ago
• krumboeck / usb2can_firmware
  ☆17Updated 9 years ago
• roboterclubaachen / usb2can
  ☆52Updated 5 years ago
• mintynet / esp32-slcan
  ESP32 slcan compatible device
  ☆101Updated 4 years ago
• Longan-Labs / Longan_CAN_MCP2515
  Arduino Library for CAN Bed
  ☆27Updated 4 years ago
• PhilippFux / ESP32_CAN_Interface
  CAN_Interface for ESP32 (Cannelloni Protocol)
  ☆56Updated 4 years ago
• designer2k2 / multidisplay
  The MultiDisplay Project, An opensource datalogger, boost controller and display for cars
  ☆36Updated 8 years ago
• skpang / Arduino_CAN-Bus_ECU_reader
  ☆50Updated 8 years ago
• karlyamashita / common_libraries
  These are reusable libraries. You'll need to include the LSP.h file and remove comment for what you need.
  ☆30Updated this week
• marcinbor85 / can-prog
  Command-line tool to flashing devices by CAN-BUS
  ☆86Updated 5 years ago
• akpc806a / CAN_Logger
  CAN Bus logger with SD card implemented using ChibiOS
  ☆71Updated 6 years ago
• pierremolinaro / acan2517FD
  Distribution of Arduino driver for MCP2517FD CAN controller (CANFD mode)
  ☆77Updated 2 months ago
• dvdfreitag / esp32-canbus
  A CANBus Triple clone based on the Espressif ESP32 SoC
  ☆18Updated 9 years ago
• doppelgrau / esp32-f9p-io-board
  An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V po…
  ☆38Updated 5 years ago
• DieselDuz42 / Arduino-CAN-bus-SD-logger
  Arduino script to log CAN bus information to SD card. Mainly focused on J1939.
  ☆25Updated 5 years ago
• CANBus-Triple / CANBus-Triple-Hardware
  Eagle CAD files for CANBus Triple Hardware
  ☆56Updated 8 years ago
• ihaque / arduino-ecu-logger
  Arduino-based OBD2 engine monitor and data logger
  ☆36Updated 9 years ago
• BretStateham / arduino-ecu-simulator
  Arduino ECU Simulator
  ☆21Updated 6 years ago
• normaldotcom / canblaster
  Utility to forward SocketCAN canbus traffic over UDP to Cangaroo and other applications
  ☆24Updated 2 years ago
• pierremolinaro / acan2515
  MCP2515 CAN Controller Driver for Arduino
  ☆94Updated 7 months ago
• autosportlabs / OBD2CAN
  Provides a bridge between any OBD2 compliant vehicle and the CAN bus interface.
  ☆43Updated 5 years ago
• craigpeacock / mcp251x
  Microchip mcp251x Linux CAN driver with hardware filtering for the Raspberry PI
  ☆32Updated 4 years ago
• atc1441 / CustomCanDecoderBox
  ☆42Updated 5 years ago
• nabilt / Bluetooth-ODB-2-Adapter
  Bluetooth ODB-2 Adapter based on the STN1110
  ☆43Updated 8 years ago
• autosportlabs / RaceCapture-Pro_firmware
  Firmware for RaceCapture-Pro Data Acquisition, control and Telemetry system for motorsports
  ☆79Updated 3 years ago
• AppSaloon / ecu-can-bus-simulator
  This is a small example sketch that simulates a cars ecu
  ☆80Updated 4 years ago
• p1ne / fdim-controller
  Schematic, PCB and source code for a small Arduino-based controller to make Ford FDIM dash display useful again
  ☆42Updated 4 years ago