autosportlabs / RaceCapture-Pro_firmwareLinks
Firmware for RaceCapture-Pro Data Acquisition, control and Telemetry system for motorsports
☆79Updated 3 years ago
Alternatives and similar repositories for RaceCapture-Pro_firmware
Users that are interested in RaceCapture-Pro_firmware are comparing it to the libraries listed below
Sorting:
- Generalized Electric Vehicle Control Unit☆117Updated 3 years ago
- ESP32 slcan compatible device☆105Updated last week
- An Arduino based LINBUS stack and signal interceptor/injector.☆201Updated 6 years ago
- CAN Bus logger with SD card implemented using ChibiOS☆74Updated 6 years ago
- Arduino CAN Bus library, MCP2515/MCP2551☆159Updated 2 years ago
- microRusEfi board for rusEfi ECU☆85Updated 4 months ago
- An open source TCM for Daimlers 722.6 gearbox. Resource repository☆122Updated last year
- Object oriented canbus library for Arduino Due compatible boards☆258Updated 3 years ago
- Common structures and functionality for CAN libraries☆144Updated last year
- ☆50Updated 8 years ago
- Eagle schematics of inverter main board, sensor boards and gate drivers☆79Updated 3 years ago
- ☆61Updated 3 years ago
- Eagle CAD files for CANBus Triple Hardware☆58Updated 8 years ago
- Arduino Library for CAN Bed☆28Updated 4 years ago
- Arduino library for CAN on Teensy 3.1, 3.2, 3.5, and 3.6☆119Updated 4 years ago
- The LIN protocol implemented over Arduino APIs (Serial and Digital IO)☆131Updated 5 years ago
- K-line/Serial/CAN interface and fuel mapper for motorcycles.☆94Updated 5 years ago
- CAN Bus Bridge / Smart Repeater☆36Updated 10 months ago
- Arduino library to add dual LIN support on SAM3X based boards with a TJA1021/TJA1027 transceiver☆120Updated 7 years ago
- USB-CAN(SocketCAN) sketch for Arduino CAN-BUS shield☆139Updated 4 years ago
- Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.☆48Updated last month
- ELM327 Library for Arduino☆71Updated 6 years ago
- Firmware for the CANalyze hardware.☆71Updated 2 years ago
- Can bus monitoring tool based on arduino and can bus shield. Implements CAN ASCII/SLCAN protocol compatible with Lawicel CAN232/CANUSB. C…☆329Updated 3 months ago
- Reverse Engineering of the Tesla 10Kw charger and development of an open source control board☆129Updated 4 years ago
- Designs for the Macchina M2☆98Updated 5 years ago
- ☆121Updated last year
- Desktop application for CANtact hardware interface☆222Updated 5 years ago
- CAN_Interface for ESP32 (Cannelloni Protocol)☆59Updated 4 years ago
- Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards☆107Updated 7 years ago