Alternatives and similar repositories for plenza:

Users that are interested in plenza are comparing it to the libraries listed below

• plenprojectcompany / plen-3DModel_Fusion360
  PLEN2's 3D model data implemented by Autodesk Fusion 360.
  ☆46Updated 2 years ago
• plenprojectcompany / PLEN2
  The world's first printable open-source humanoid, starter kit.
  ☆285Updated 4 years ago
• davidhend / Hexapod
  ☆36Updated 7 years ago
• Roboteurs / rbx1-software
  Software to drive a 3D printed robot with a SlushEngine or other motor controller driver
  ☆28Updated 7 years ago
• yamatai319 / RS304Spot_QuRo
  Spot-like Robot by using Futaba RS304/303 Servo. Quro named by Quadruped Robot.
  ☆28Updated 4 years ago
• jjrobots / B-ROBOT_EVO2
  New and improved version of our Balancing Robot B-ROBOT
  ☆85Updated 7 years ago
• dabmake / ESPROS
  ROS for ESP8266/ESP32
  ☆43Updated 6 years ago
• Rhoban / Metabot
  Open-source DIY parametric robot
  ☆59Updated 5 years ago
• Toglefritz / Capers_II
  Capers II is a hexapod robot with three degrees of freedom per leg.
  ☆52Updated 6 years ago
• jjrobots / B-ROBOT
  B-ROBOT Arduino self balancing robot from JJROBOTS.com
  ☆109Updated 4 years ago
• Xevel / NXV11
  Hacking of the Neato XV-11 lidar
  ☆83Updated 4 years ago
• poppy-project / poppy-torso
  Poppy Torso is an open-source and 3D printed torso robot. Optimized for research and education purposes, its modularity allows for a wide…
  ☆39Updated 2 years ago
• bikerglen / robot-arm-v01
  ☆56Updated 7 years ago
• tuuzdu / crab_project
  ROS hexapod robot on BeagleBone Black
  ☆97Updated 6 years ago
• regishsu / SpiderRobot
  ☆105Updated 9 years ago
• OperationSmallKat / SmallKat_V2
  ☆33Updated 2 years ago
• poppy-project / poppy-ergo-jr
  🤖 Poppy Ergo Jr is an open-source robotic arm based on modular 3D printed conception and low-cost XL-320 motors.
  ☆186Updated 2 years ago
• rppelayo / arduino-self-balancing-robot
  ☆73Updated last year
• KurtE / Phantom_Phoenix
  Lynxmotion Phoenix code ported to Trossen PhantomX
  ☆96Updated 8 years ago
• XRobots / SonicRobot
  ☆29Updated 2 years ago
• plenprojectcompany / PLEN5Stack
  IoT biped robot using M5Stack.
  ☆16Updated 4 years ago
• NiryoRobotics / niryo_stepper
  ☆49Updated 6 years ago
• JRodrigoTech / xLIDAR
  Affordable and open-source LIDAR based on three VL53L0X ranging sensor.
  ☆68Updated 6 years ago
• T-Kuhn / ESP32-MicroRobotArm
  Micro Robot Arm with ESP32 and 28BY-48 12V steppers
  ☆81Updated 5 years ago
• JoeyByrnes / OpenLeg
  Hardware and Software for an Open Source Robotic Leg
  ☆78Updated last year
• XRobots / ROSremote
  ☆33Updated 3 years ago
• maximkulkin / lewansoul-lx16a
  Library and UI to configure and control LewanSoul LX-16A servos
  ☆65Updated last year
• SmallpTsai / 7688-hexapod
  An 18 DOF Hexpod project using LinkIt Smart 7688 + PCA9685
  ☆73Updated 8 years ago
• Vidicon / camsense-X1
  unofficial reverse engineering of a Chinese LiDAR. Discussed this on my discord: https://discord.gg/zRGJcqa
  ☆56Updated 4 years ago
• davidsanfal / miniloki
  Omnidirectional robotic platform
  ☆26Updated 8 years ago