Alternatives and similar repositories for MiniPlan-V6:

Users that are interested in MiniPlan-V6 are comparing it to the libraries listed below

• SmallpTsai / 7688-hexapod
  An 18 DOF Hexpod project using LinkIt Smart 7688 + PCA9685
  ☆73Updated 8 years ago
• maartenweyn / SpotMicro_ESP32
  ☆41Updated 4 years ago
• anoochit / arduino-quadruped-robot
  Arduino Quadruped Robot, Spider Robot
  ☆106Updated 9 years ago
• Blomdoft / fatKame
  Based on the miniKame, modifications to the body of the robot to allow more space, included a ultrasonic sensor. ESP8266 based quadruped …
  ☆28Updated 8 years ago
• PingguSoft / esp32_quadruped
  quadrupedal robot using esp32
  ☆48Updated 4 months ago
• trandi / esp32-self_balancing_robot
  3D printed self balancing robot using and ESP32 for the brains, MPU6050 for gyros & accelerometres and DRV8825 to drive the 2 servo motor…
  ☆81Updated 7 years ago
• T-Kuhn / ESP32-MicroRobotArm
  Micro Robot Arm with ESP32 and 28BY-48 12V steppers
  ☆82Updated 5 years ago
• michaelkubina / SpotMicroESP32
  My take on a SpotMicro with an optimized design for supportfree 3D-printing. It utilizes an ESP32-DevKitC for the low-level control of th…
  ☆339Updated 4 months ago
• rppelayo / arduino-self-balancing-robot
  ☆73Updated last year
• vorpalrobotics / VorpalHexapod
  Arduino code for both the Vorpal Hexapod and Vorpal Hexapod Gamepad.
  ☆139Updated 4 years ago
• plenprojectcompany / PLEN2
  The world's first printable open-source humanoid, starter kit.
  ☆291Updated 4 years ago
• bqlabs / zowi
  An open-source and fully hackable biped robot.
  ☆49Updated 9 years ago
• isaac879 / Delta-Robot
  This repository is for my 3D printed delta robot controlled by an Arduino Nano.
  ☆45Updated 5 years ago
• jjrobots / B-ROBOT_EVO2
  New and improved version of our Balancing Robot B-ROBOT
  ☆85Updated 7 years ago
• SovGVD / esp32-robot-dog-code
  WIP: ESP32 powered robot dog, quadruped robot. This is just code, hardware in the other repositories
  ☆119Updated 2 years ago
• 4ndreas / Mantis-Robot-Arm
  3d printable Robot arm
  ☆40Updated 7 years ago
• JJulio / b-robot
  Self Balance arduino robot. Control via Smartphone. Fully 3D printed project.
  ☆146Updated 10 years ago
• XRobots / RobotX
  All the things for RobotX
  ☆126Updated 6 years ago
• Roboteurs / rbx1-software
  Software to drive a 3D printed robot with a SlushEngine or other motor controller driver
  ☆28Updated 8 years ago
• JavierIH / octosnake
  An oscillator library for creating walking gaits on robots
  ☆12Updated 8 years ago
• ghmartin77 / B-ROBOT_EVO2_ESP32
  ESP32 port of JJRobots brilliant B-ROBOT_EVO2
  ☆58Updated 3 years ago
• CoretechR / ESP32-WiFi-Robot
  ☆147Updated 6 years ago
• Traverso / QuadrupedRobot
  Arduino code to control a quadruped robot
  ☆9Updated 8 years ago
• JoLamMaker / ThisArm_Firmware
  G-code enabled firmware for Robot Arms
  ☆32Updated 3 years ago
• XRobots / PerformanceRobots
  ☆37Updated 5 years ago
• KurtE / Phantom_Phoenix
  Lynxmotion Phoenix code ported to Trossen PhantomX
  ☆96Updated 8 years ago
• jjrobots / B-ROBOT
  B-ROBOT Arduino self balancing robot from JJROBOTS.com
  ☆110Updated 4 years ago
• ftobler / robotArm
  Software for a 3D Printed Robot Arm
  ☆129Updated 4 years ago
• miguelasd688 / Quadruped-dog-like-robot
  DIY project of a quadruped robot as a exercise for programming.
  ☆22Updated 4 years ago
• XRobots / WiperMotorServo
  ☆45Updated 6 years ago