Alternatives and similar repositories for ArduCAM_USB_Camera_Shield

Users that are interested in ArduCAM_USB_Camera_Shield are comparing it to the libraries listed below

• ArduCAM / MIPI_Camera
  ☆269Updated last year
• Hermann-SW / Raspberry_v1_camera_global_external_shutter
  Enable Raspberry v1 camera to do global external shutter capturing
  ☆98Updated 5 years ago
• antmicro / ov9281-camera-board
  Camera board with a pair of OmniVision OV9281 sensors
  ☆71Updated last month
• groupgets / purethermal1-uvc-capture
  USB Video Class capture examples for PureThermal 1 / PureThermal 2 FLIR Lepton Dev Kit
  ☆140Updated 9 months ago
• groupgets / purethermal1-firmware
  Reference firmware for PureThermal 1 FLIR Lepton Dev Kit
  ☆136Updated 9 months ago
• RidgeRun / NVIDIA-Jetson-IMX477-RPIV3
  NVIDIA Jetson IMX477 HQ RPI V3 camera driver
  ☆134Updated 2 years ago
• rellimmot / Sony-IMX219-Raspberry-Pi-V2-CMOS
  Sony IMX219 Raspberry Pi V2 CMOS Datasheet and Source Code
  ☆166Updated 9 years ago
• Lauszus / ADNS3080
  Example code for the ADNS-3080 optical flow sensor
  ☆53Updated 2 years ago
• analogdevicesinc / aditof_sdk
  Analog Devices 3D ToF software suite
  ☆72Updated last year
• InES-HPMM / FPD-LinkIII_Raspberry_HW
  FPD-Link III Hardware compatible with Raspberry Pi Camera and Raspberry Pi CSI connector.
  ☆52Updated 5 years ago
• basecamelectronics / sbgc-api-examples
  A very basic SimpleBGC Serial API examples and libraries. This version is outdated and not supported. A new fully-featured version you ca…
  ☆82Updated 4 years ago
• Kevin-WSCU / 96Boards-Camera
  96Boards camera support from Deltavison :
  ☆42Updated 7 years ago
• NVIDIA-AI-IOT / my-jetson-nano-baseboard
  An open source Jetson Nano baseboard and tools to design your own.
  ☆84Updated 4 years ago
• bitcraze / Bitcraze_PMW3901
  Arduino driver for PMW3901 optical flow sensor
  ☆68Updated 3 years ago
• alliedvision / linux_nvidia_jetson
  Allied Vision CSI-2 camera driver for NVIDIA Jetson Systems with JetPack 5.x
  ☆115Updated 6 months ago
• Myzhar / Lepton3_Jetson
  Library and examples to connect the FLIR Lepton3 thermal camera to Nvidia Jetson embedded boards
  ☆57Updated 3 years ago
• charmedlabs / pixy2
  ☆144Updated last year
• linorobot / ros_dwm1000
  Indoor/Outdoor Positioning System based on Decawave's DWM1000 Ultra Wide Band transceivers.
  ☆79Updated 5 years ago
• HongshiTan / RTIMULib2
  9-dof, 10-dof and 11-dof IMU fusion library for Linux systems (development version)
  ☆92Updated 3 years ago
• iliasam / OpenLIDAR
  Open Hardware scanning triangulation laser rangefinder
  ☆210Updated 4 years ago
• smukkejohan / RTIMULib
  RTIMULib makes it easy to use 9-dof IMUs with embedded Linux systems (especially the Raspberry PI!)
  ☆49Updated 4 years ago
• realizator / stereopi-kicad-schematic
  StereoPi KiCad schematics
  ☆45Updated 6 years ago
• NVIDIA-AI-IOT / argus_camera
  Simple Python / C++ interface to CSI camera connected to NVIDIA Jetson.
  ☆95Updated 7 years ago
• sparkfun / 9DOF_Razor_IMU
  9DOF Razor IMU available from SparkFun Electronics
  ☆117Updated 5 years ago
• kriswiner / EM7180_SENtral_sensor_hub
  (Affordable) Ultimate Sensor Fusion Solution
  ☆99Updated 7 years ago
• matyay / csi2usb
  A CSI to USB "converter" using a Cypress CX3 chip
  ☆18Updated 5 years ago
• VC-MIPI-modules / vc_mipi_nvidia
  Vision Components MIPI CSI-2 driver for NVIDIA Jetson Nano, Xavier NX, AGX Xavier, TX2 and Orin Nano, Orin NX
  ☆119Updated this week
• raspberrypi / raspiraw
  Example app directly receiving raw data from CSI2 sensors
  ☆272Updated last year
• JetsonHacksNano / buildKernelAndModules
  Build the Linux Kernel and Modules on board the NVIDIA Jetson Nano Developer Kit
  ☆99Updated last year
• groupgets / GetThermal
  Cross-platform USB thermal camera viewer
  ☆249Updated 9 months ago