Alternatives and similar repositories for CAN-Monitor-qt

Users that are interested in CAN-Monitor-qt are comparing it to the libraries listed below

• mikebailey61 / J1939_stack
  J1939 stack
  ☆53Updated 10 years ago
• MHS-Elektronik / J1939Display
  Open Source J1939 Data Viewer for the Raspberry Pi
  ☆23Updated 7 years ago
• TDahlmann / canpp
  CAN bus analyzing and simulation GUI tool for Windows.
  ☆63Updated 3 months ago
• sz-CHEN / ZCANBus
  A common interface for PeakCAN and KvaserCAN
  ☆14Updated 6 years ago
• moonglow / kvaser_cantact
  Xvaser LL v2 firmware for CANtact ( CANable ) or any other similar boards.
  ☆46Updated 3 years ago
• rusoku / CANAL-View
  CANAL View Qt GUI for TouCAN USB to CAN bus converter
  ☆23Updated 2 years ago
• devcoons / iso14229
  ☆21Updated 6 months ago
• GreyZhang / J1939_basic
  My hacking trip to learn CAN J1939.
  ☆36Updated 4 years ago
• TheRo0T / CAN-USB-STM32
  ☆65Updated 9 years ago
• Bytewerk / pcan_stm32
  ☆20Updated 6 years ago
• jsphuebner / stm32-car
  Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus
  ☆60Updated last month
• open-LIN / open-LIN-c
  Implementation of Local interconnect network in c
  ☆75Updated last month
• mach-systems / CANFD-LIN-Gateway
  An STM32CubeIDE project for the CAN-FD LIN Gateway device.
  ☆21Updated 2 years ago
• raychow / UDSonCAN
  Unified Diagnostic Services on Controller Area Network
  ☆59Updated 11 years ago
• kurt-vd / test-can-j1939
  Readme + howto for can-j1939
  ☆41Updated 7 years ago
• uCAN-LIN / LinUSBConverter
  LIN(Local interconnect network) to USB converter with LIN master support compatible with SLCAN.
  ☆78Updated 2 years ago
• altelch / uds
  ISO 14229-1 UDS protocol implementation for Arduino
  ☆57Updated 11 months ago
• paoloteti / libj1939
  Library to work with J1939 Frames used in CAN bus in car and trucks industries
  ☆26Updated 4 years ago
• Truck-OBD-Development / J1939_Decode
  ☆26Updated 9 years ago
• 596142041 / CANBootloader-Qt
  基于CAN的IAP所用的上位机
  ☆64Updated 5 years ago
• lotusczp / Lobster
  Lobster is a PC tool designed mainly for measurement, calibration, debugging of embedded system.
  ☆21Updated 3 years ago
• moonglow / vector_can
  Vector VN1610 protocol implementation for cheap STM32F4 hardware
  ☆48Updated 2 years ago
• bentearadu / Diagnostics
  Diagnostic based on UDS/KWP2000/TP
  ☆23Updated 11 years ago
• darauble / lawicel-slcan
  Partial Lawicel/SLCAN implementation at 1 Mb/s CAN speed and 460800 UART baud rate
  ☆29Updated 6 years ago
• RudolphRiedel / USB_CAN-FD
  This is an Open Source Hardware USB to CAN-FD Interface
  ☆65Updated 3 months ago
• madprogrammer / stm32-can-bootloader
  STM32 CAN-bus bootloader
  ☆76Updated 8 years ago
• qt / qtserialbus
  Support for CAN and potentially other serial buses.
  ☆78Updated this week
• Hirofeng / cantp
  Code implemention of ISO 15765-2 CAN transport layer.
  ☆27Updated 6 years ago
• linklayer / busmaster
  BUSMASTER is an Open Source Software tool to simulate, analyze and test data bus systems such as CAN. BUSMASTER was conceptualized, desig…
  ☆38Updated 4 years ago
• famez / J1939-Framework
  Framework to work with J1939 Frames used in CAN bus in bus, car and trucks industries
  ☆167Updated last year