Alternatives and similar repositories for Deye_Battery_Serial_BUS

Users that are interested in Deye_Battery_Serial_BUS are comparing it to the libraries listed below

• Ackmaniac / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆18Updated 3 weeks ago
• Sleeper85 / esphome-jk-bms-can
  ☆103Updated last year
• Uksa007 / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆194Updated last year
• softwarecrash / Daly2MQTT
  ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems
  ☆176Updated 3 months ago
• ArminJo / JK-BMSToPylontechCAN
  Converts the JK-BMS RS485 data to Pylontech CAN data
  ☆97Updated 8 months ago
• syssi / esphome-seplos-bms
  ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART, RS485 or BLE
  ☆105Updated this week
• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆81Updated 2 years ago
• Tobi177 / venus-chargerybms
  Driver to embed the Chargery BMS to a Venus OS device
  ☆33Updated last year
• ai-republic / bms-to-inverter
  Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an invert…
  ☆210Updated 2 weeks ago
• meteosat007 / solar-pylontech
  How to connect to a Sofar HYD3600 Inveter and 2 Pylontech US3000 batteries
  ☆20Updated 5 years ago
• justinschoeman / dalybms
  Interface layer for Daly Smart BMS
  ☆20Updated 3 years ago
• byte4geek / SEPLOS_MQTT
  Read data From Seplos BMS and send them to the Home Assistant
  ☆46Updated 2 years ago
• Sleeper85 / esphome-yambms
  Yet another multi-BMS Merging Solution
  ☆155Updated this week
• syssi / esphome-pace-bms
  ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)
  ☆67Updated this week
• syssi / esphome-jbd-bms
  ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
  ☆192Updated this week
• botaneta / JKbms_Emu_Pylon
  Emulación del protocolo CANBUS de Pylontech, para comunicación con inversores fotovoltaicos, usando un ESP32
  ☆13Updated 2 months ago
• NEEY-electronic / JK
  ☆65Updated 3 years ago
• txubelaxu / esphome-jk-bms
  ESPHome components to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE. Monitor multiple JK-PBx (hw v1…
  ☆57Updated 8 months ago
• shining-man / bsc_fw
  Firmware battery safety controller (BSC)
  ☆140Updated this week
• maxx-ukoo / jk-bms2pylontech
  JK BMS to PYLON CANBUS Protocol converter
  ☆40Updated 3 years ago
• irekzielinski / Pylontech-Battery-Monitoring
  Adding WiFi monitoring to US2000B and US2000C batteries.
  ☆150Updated 3 years ago
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆94Updated last week
• NismoBoy34 / Esp32LeafInverterBridge
  esp32 Based can-bridge with webserver
  ☆18Updated last year
• SmartEVSE / SmartEVSE-3
  Smart Electric Vehicle Charging Station (EVSE)
  ☆193Updated 2 weeks ago
• CurtRod / SimpleEVSE-WiFi
  Brings EVSE WB/DIN into your WiFi
  ☆81Updated 2 years ago
• OpenEVSE / openevse_esp32_firmware
  OpenEVSE V4 WiFi gateway using ESP32
  ☆205Updated last week
• loopyengineeringco / Daly2Sofar
  ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).
  ☆33Updated 2 years ago
• jblance / jkbms
  repo with attempts to test connectivity to JK-BMS via BLE
  ☆29Updated 2 years ago
• openenergymonitor / open_evse
  Firmware for OpenEnergyMonitor OpenEVSE
  ☆18Updated 3 years ago
• SunshadeCorp / can-service
  Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.
  ☆35Updated 9 months ago