darauble / lawicel-slcanLinks
Partial Lawicel/SLCAN implementation at 1 Mb/s CAN speed and 460800 UART baud rate
☆29Updated 6 years ago
Alternatives and similar repositories for lawicel-slcan
Users that are interested in lawicel-slcan are comparing it to the libraries listed below
Sorting:
- This is an Open Source Hardware USB to CAN-FD Interface☆71Updated 6 months ago
- LIN(Local interconnect network) to USB converter with LIN master support compatible with SLCAN.☆83Updated 3 years ago
- Firmware to support gs_usb on most STM32 devices☆47Updated last week
- Xvaser LL v2 firmware for CANtact ( CANable ) or any other similar boards.☆47Updated 3 years ago
- CAN bus analyzing and simulation GUI tool for Windows.☆71Updated 7 months ago
- slCAN compatible firmware for STM32f103C8T6☆75Updated 3 years ago
- Open source can bus analyzer software - with support for CANable / CANable2, CANFD, and other new features☆230Updated 2 years ago
- This is project SuperCAN. An open source USB to CAN-FD protocol.☆89Updated last month
- Open source project that uses the CANable hardware from protofusion.org☆40Updated last month
- STM32 CAN-bus bootloader☆78Updated 8 years ago
- Command-line tool to flashing devices by CAN-BUS☆86Updated 5 years ago
- ☆67Updated 9 years ago
- Vector VN1610 protocol implementation for cheap STM32F4 hardware☆50Updated 3 years ago
- Firmware for the CANable USB to CAN adapter☆220Updated 2 years ago
- Implementation of Local interconnect network in c☆79Updated 4 months ago
- this src using stm32f103 as data converter for OBD . support 9141-2 ,15765☆138Updated 6 years ago
- gs_usb compatible firmware for candleLight, cantact and canable☆74Updated 4 years ago
- CAN Bus logger with SD card implemented using ChibiOS☆71Updated 6 years ago
- Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!☆82Updated last year
- A universal CAN bus monitoring program☆76Updated 6 years ago
- CAN to USB adapter using Lawicel/Canhacker protocol.☆22Updated 6 years ago
- Readme + howto for can-j1939☆41Updated 7 years ago
- ☆50Updated 5 years ago
- can bootloader for use with stm32 microcontrollers☆43Updated 3 years ago
- Port of the Hubner Inverter to the TI C2000 architecture used by Tesla inverters.☆16Updated 2 years ago
- ☆23Updated 10 months ago
- ISO 15765-2 TP implementation for Arduino☆87Updated 3 months ago
- Main firmware of the Huebner inverter project☆176Updated 2 months ago
- The bootloader used to flash our CAN-connected boards☆147Updated 2 years ago
- Yet another USB-CAN adapter.☆13Updated 3 years ago