sidd-kishan / PicoPiFi
A driverless usb rndis wifi dongle based on $6 and easily available pi pico w. To support wifi on experimental platforms like windows on Raspberry PI and other windows arm64 setups. A wifi to usb ethernet bridge.
☆36Updated last month
Related projects ⓘ
Alternatives and complementary repositories for PicoPiFi
- Ultra low cost HDMI-USB Video Acquisition (HDMI Capture Card) based on MS2109☆54Updated 2 years ago
- Raspberry Pi Pico UART-USB-I2C bridge (USB to six UARTs and one I2C)☆40Updated 11 months ago
- Opensource toolchain for BL602/BL604, BL702/BL704/BL706, BL616/BL618, BL808 and other series of RISC-V based chips from Bouffalo Lab☆16Updated last year
- USB test instrument☆89Updated 2 weeks ago
- Super simple USB sniffer using Raspberry Pi Pico.☆68Updated 2 years ago
- RP2040 Minimal hardware (PIO) Ethernet interface + LwIP TCP/IP stack driver☆29Updated last year
- Raspberry Pi Pico USB I/O Board☆63Updated last year
- USB-Cereal is a powerful, fully open source development tool that simplifies testing, development, debugging, and manufacturing of device…☆94Updated last year
- Use the ch32v003 as a usb pd controller☆34Updated 4 months ago
- eMMC WFBGA153 to microSD card adapter PCB☆54Updated 5 months ago
- Bus Pirate v5 Hardware☆48Updated this week
- A tool for flashing Black Magic Probe firmware☆22Updated last month
- 32-bit RISC-V MCU CH32X035 built-in USB PD PHY☆47Updated this week
- Serial Terminal Firmware for RP2040 Boards☆19Updated last month
- Standalone WiFi driver for the Pi Pico-W☆94Updated last year
- USB PD/PPS direct battery charge controller script for the YK-Lab Shizuku USB tester (a.k.a. YK-Lab YK001, AVHzY CT-3, Power-Z KT002, ATO…☆70Updated 11 months ago
- FreeBSD IoT Project☆19Updated 11 months ago
- Experiments on the RP1☆55Updated last year
- Using the ch32v003 as a temperature sensor☆17Updated last year
- SDK sch&layout reference design and datasheet documention☆53Updated 9 months ago
- Extreme Overclocking on Raspberry Pi's RP2040 chip☆51Updated 2 years ago
- HydraUSB3 V1 is an open source developer kit for the WCH CH569 MCU to experiment with streaming / high-speed protocols(USB2 HS, USB3 SS, …☆29Updated 10 months ago
- OpenOCD source code for CH32V series MCUs released by Mounriver IDE☆51Updated 2 years ago
- A CLI-driven demo of a Raspberry Pi Pico operating as a USB Mass Storage Class Host☆33Updated last year
- PicoSigGen - Low cost arbitrary waveform generator☆30Updated last year
- Linux virtual Ethernet driver and utility enabling BL808 Linux to use on-chip Wi-Fi☆23Updated 11 months ago
- ☆18Updated 4 years ago
- The Ultra-Compact Powerhouse for LoRa Debugging and Connectivity☆46Updated 8 months ago
- CH340, CH343, CH342, CH344,CH348☆32Updated last year
- Via Labs 805/806☆30Updated last year