Alternatives and similar repositories for Pico-10BASE-T-Library

Users that are interested in Pico-10BASE-T-Library are comparing it to the libraries listed below

• eeucalyptus / ch32v003-usbpd
  Use the ch32v003 as a usb pd controller
  ☆46Updated last year
• lonehog / JTAGprobe
  Firmware for Raspberry Pico to work as JTAG debugger using OpenOCD
  ☆61Updated 7 months ago
• shraiwi / ATTiny555
  A 555 timer simulator running on the ATTiny85 :)
  ☆63Updated 3 years ago
• steve-m / Pico-100BASE-TX
  Bit-banged 100 MBit/s Fast Ethernet transmitter and UDP framer for Raspberry Pi RP2040/RP2350
  ☆81Updated last week
• holysnippet / pico_eth_doc
  RP2040 Minimal hardware (PIO) Ethernet interface + LwIP TCP/IP stack driver
  ☆109Updated 2 years ago
• pmarques-dev / PicoEncoder
  High resolution quadrature encoder using the PIO on the RP2040
  ☆61Updated 5 months ago
• TEC-IST / rp2040-hdmi-1080p-hardware
  ☆36Updated last year
• testudor / modular-breadboard-base
  Breadboard base with attachment slots for various modules
  ☆36Updated 2 years ago
• wasspaul / sig_gen
  A simple cost-effective demo, test, training, board for an oscilloscope made from a Raspberry Pi Pico
  ☆59Updated 10 months ago
• Jana-Marie / analog-toolkit
  A smol and simple STM32G431 based Analog to USB toolkit.
  ☆67Updated last year
• SyedTahmidMahbub / q-dpico_picprog72
  Quick and dirty PIC16F72 programmer using the Raspberry Pi Pico and MicroPython
  ☆33Updated last year
• holysnippet / pico_eth
  RP2040 Minimal hardware (PIO) Ethernet interface + LwIP TCP/IP stack driver
  ☆35Updated last year
• MisterHW / 44780HD
  ☆66Updated 4 years ago
• tomverbeure / fake_parallel_printer
  Capture traffic on parallel printer port to USB
  ☆86Updated last year
• xyphro / I3CBlaster
  Raspberry pico / RP2040 based USB to I3C converter with Python support
  ☆72Updated 2 months ago
• perexg / picoprobe-sump
  ☆40Updated 4 years ago
• notro / gud-pico
  Raspberry Pi Pico GUD USB Display
  ☆30Updated 11 months ago
• ginbot86 / DingoCharge-Shizuku
  USB PD/PPS direct battery charge controller script for the YK-Lab Shizuku USB tester (a.k.a. YK-Lab YK001, AVHzY CT-3, Power-Z KT002, ATO…
  ☆82Updated last year
• CRImier / AltmodeFriend
  Altmode Friend code, STEP and other files
  ☆36Updated last year
• circuitvalley / Intel_FPGA_Board_98Y2610
  This Repo has Files related to reverse engineering of IBM 98Y2610 Intel Cyclone IV
  ☆69Updated 10 months ago
• fdufnews / SMART-Response-XE-schematics
  Schematics of the SMART Response XE terminal
  ☆50Updated 3 years ago
• kbeckmann / uart-audio
  Audio out with an FTDI UART cable
  ☆43Updated 4 years ago
• jaydcarlson / py32-template
  ☆89Updated last year
• NNNILabs / Manhattan-Adapters-Prototyping-Ideas
  SMD adapters for Manhattan-style prototyping.
  ☆43Updated last year
• m1geo / Pi5_PCIe
  A crude reverse engineering of the Pi5 PCIe connector & potential breakout boards.
  ☆80Updated last year
• charlie-x / eakins-camera
  controlling the eakins microscope camera via sockets
  ☆57Updated last year
• jjsch-dev / pico_i2c_sniffer
  i2c sniffer with a Raspberry Pi Pico
  ☆90Updated 4 years ago
• cnlohr / cnixxi
  My experiment with nixie tubes.
  ☆143Updated 2 months ago
• carrotIndustries / cyclotron-mini
  Battery-less cyclocomputer
  ☆39Updated 2 years ago
• Tengo10 / pinout-overview
  A simple Python tool to create pinout overviews of ICs.
  ☆34Updated last year